nexia from holland has got more power

[nexiagtx16]

this was it before, and this is new


and some new injectors





does anyone nows what it is and, from what car this is?

[nexiagtx16]

well it is the airintake and injectors of a nubira 1.6 16valve
the airintake is variable, for low rpm is it a long way for the air to get into the cilinder, and for above 4,500 rpm it opens a valve and the way is al lot shorter sow the air is faster in the cilinder.

the injectors are bigger the the original nexia 1.5 injectors, and that meens more feuel.
and togeter whit the air intake ik gives me morge power .

it is a world of difrent, on acceleration it is a lot faster, and if the valve opens it keeps on going.

iwant to go on a dyno to look howmuch HP it has now .
I hope you understand me, dont now so good how you name some things in english

greetings from holland

[AcingTeam]

I'm guessing you got 3 more HP

[Audacity Racing]

Throw a test pipe and VGIS together and you probably got 3 to the wheels...

Nice upgrades!

[nexiagtx16]

I'm guessing you got 3 more HP

It serieus feels like 10 extra hp, but becouse Im not sure I wana put it an a dyno then I now it for sure.



quote Throw a test pipe and VGIS together and you probably got 3 to the wheels...

Nice upgrades! quote

I dont realy understand what you meen, my english is not that good

tanks for the reaction

edit: I beleve my headgaskit is dead, if I open de cap of the coolingfleuid is there alot of presure on it.
`m gonna test it tomorro and then Ill se what happens.

[IvanCZ]

Try to use some dictionary, please.

[dohc]

Hey Bro you have got nice pics posted and tell you what the max gains you want from you car will come if you install a 4-2-1 header configuration which roughly means 10-15bhp more power so you can get into a range of 115 bhp for you car which will be a dramatic increase in power also go for ram air or cold air intake

with greetings from Pakistan

[nexiagtx16]

Hey Bro you have got nice pics posted and tell you what the max gains you want from you car will come if you install a 4-2-1 header configuration which roughly means 10-15bhp more power so you can get into a range of 115 bhp for you car which will be a dramatic increase in power also go for ram air or cold air intake

with greetings from Pakistan

thanx for the compliment,
Ive made a cold air intake yesterday.
but because my headgasket and krankshaft bearings are dead, Im gonna switch engine monday.
I already have a engine which only drove 50.000km and has`nt run for 2 years, so the first time I need to drive a bit carefull.
mabay later I put a 4-2-1 exaust on it.

[lanowoo]

Now, with that engine not running for 2 years, some of the gaskets may have dry rotted, you never know, so check the gaskets and yes, be careful of the engine.

[nexiagtx16]

new update,
last monday I ve begon with taking out the old engine so I could start with the rebulding of the new engine.

things I needed from the old engine where:
air intake
exaust pipe
ingnition
injector rail with injectors ( the nubira one)
gearbox and cluch
thermostat
the distribution and waterpump (are only 1,5 years old so asgood as new)

so I removed those parts, but before I ve placed them on the new engine I ve cleand them becouse there was oli allover the place.

on the new engine I didn`t trust som of the gaskits so I replaced them
camshaft
ignition
thermostate gaskit
intake gaskit
exaust gaskit
egr (exaust recirculation) I didnt need, becouse on the old engine I did`nt had it.
waterpump gaskit

and becouse Ive cleand all the parts it was alot of work.
monday I was buzzy from 8 o clock in the morning till 8 o clock in the evening.
Tuesday from 1 o clock midday till 8 o clock in the evening.

things I still have tho do are:
putting the plugs on the correct place
connecting the water hoses from cooler to engine and fill it up
re full the power steering
new oil and filter
connect the air hose ( with cold air intake )
place the driving shafts
place the exaust pipe

so I`n not finished yet, but the most has done.

so far I dont have any pic , completely forgotten.
but tomorrow I will take some of the clean engine

greetings from holland

[nexiagtx16]

new place for the airfilter, 10cm above the road






some new pics

[mr_g]

this was it before, and this is new


and some new injectors





does anyone nows what it is and, from what car this is?

This is 1.6 16V engine? Something older than A16DM? A16DM has that inlet stock...

[norman]

moin,

no, it is the a15mf with 90HP and 16 valves. he put on it the intake from the a16dm.

tschau norman

[Lao]

Was the intake a remove-install job? Did you have to do any modifications?

[IvanCZ]

This is not good idea - it will be dirty all the time...