Rear disk conversion for Nubira II

MMamdouh · Post by **MMamdouh** » Mon Jun 12, 2006 2:27 pm

any body knows if the Opel Vectra's rear suspension similar to the rear suspension of a Nubira II??

MMamdouh

sim0ng · Post by **sim0ng** » Mon Jun 12, 2006 2:34 pm

check the part numbers as they could be! a lot of things are interchangeable across the range....

MMamdouh · Post by **MMamdouh** » Tue Jun 13, 2006 8:37 am

forget about vectra, we found yesterday a rear suspension unit for a nubira with disk brakes... thats what we will go for for sure.

now the question is: will we need the proportional valves from the rear disks version to replace the ones we got on the rear drums version?? i see on the lanos conversion this is a must or else rear lockup will be a big problem so i guess it is the same on the NUbi... right?

also any concerns regarding the hand brake cables and stuf??

MMamdouh

Post by **Efratech** » Tue Jun 13, 2006 3:42 pm

yeah its recomended that you change the proportinal valves or distributors as they're also known.

the hand brake cable should be needed too.

Post by **Efratech** » Tue Jun 13, 2006 3:43 pm

and if you can get the master cylinder, they should be different too