Hey ive seen this on ebay today what do you think guys will it fit our lanos.
john
http://cgi.ebay.com.au/DAEWOO-LANOS-TUR ... dZViewItem
DAEWOO LANOS TURBO MANIFOLD
Moderators: daewoomofo, Moderators Group
-
john_trickle
- Expert
- Posts: 1011
- Joined: Sun Jun 05, 2005 10:04 am
- Location: AUSTRALIA
- Contact:
+1. Thats a 1.5 8v SOHC manifold for sure.GsiTurbo wrote:Based on the shape of ports, it looks like its for the 8V model, as opposed 16v.
Looks to be a Nissan T turbo flange. Welds dont look too bad.
High mount manifold, there'd be no hiding that thing!
That's a decent price, it should sell...
--Tim
-
john_trickle
- Expert
- Posts: 1011
- Joined: Sun Jun 05, 2005 10:04 am
- Location: AUSTRALIA
- Contact:
I might buy it
I had to make sure as mine is 1.5 8v long as that fits ill get it then i need the turbo to fit it any suggestions.
John
John
It doesnt mention anything about the turbo flange dimensions but it looks like a Nissan T flange.
So you'll need to find out if its a T25/T28 flange or if its a bigger T3 flange.
Either way, these turbos you can get off eBay or at a wrecker (from a CA18 or SR20 engined Nissan for the smaller turbos) without to many problems. They'll be fine for the 1.5L.
--Tim
So you'll need to find out if its a T25/T28 flange or if its a bigger T3 flange.
Either way, these turbos you can get off eBay or at a wrecker (from a CA18 or SR20 engined Nissan for the smaller turbos) without to many problems. They'll be fine for the 1.5L.
--Tim