I installed my oil press sender today?

N/A tech, Cold Air Intakes, Spark Plugs/wires, Cat backs, Exhaust...etc

Moderators: daewoomofo, Moderators Group

Locked
kroz123
Expert
Posts: 592
Joined: Sun May 30, 2004 3:47 pm
Location: Oranjestad, Aruba
Contact:

I installed my oil press sender today?

Post by kroz123 »

hey guys what's up,

I installed my oil press sender and the gauge reads the press fine but my oil gauge is Bar not Psi,

So when the car is idling it reads 3.5 with A/C on with the A/C off it reads 1.5 and when reved it reads 4.5

it's my car oil pressure good?

thanx
T18SED Engine.

Image
Image
debo890
Super
Posts: 250
Joined: Mon Apr 26, 2004 3:36 pm
Location: rhode island

Post by debo890 »

yes, your oil pressure is fine. 1 bar = 14.7psi
@ 1.5 bar = 22.05 psi
@ 3.5 bar = 51.5psi
@ 4.5 bar = 66 psi

your pressure should increase gradually as you raise the rpm. ;)
got drift?
kroz123
Expert
Posts: 592
Joined: Sun May 30, 2004 3:47 pm
Location: Oranjestad, Aruba
Contact:

Post by kroz123 »

hey thanx alott debo and yeah the press increases as I raise the rpm.

thanx again ;)
T18SED Engine.

Image
Image
Locked