pulleys
Moderators: daewoomofo, Moderators Group
pulleys
I was wondering, would an under drive pulley for a 1.5l SOHC make a hp increase, And if it would where and how could i get one made. Is it just one pulley you are replacing. I was thinking about it, I would be willing to get one made or even find one that is close, off of another car and get it machined. Has anyone attemped this before
well... the pully of the 1.5 (identical to the 1.6 pully) is pretty big as it includes the toothed ring for the crank position sensor as well, so far i havent found an UD or even a light weight pully for that engine, i only found a lighter crank pully for the 2.0 engine out of a '97 Opel Vectra.
in general UD pullys will make more power if fitted on any engine as you are fine tuning physics here and it applys to all engines... also a light weight pully will add power but not as much as the UD indeed, the benifit is you still keep the same level of functionality of the alternator, A/C and PWS.
MMamdouh
in general UD pullys will make more power if fitted on any engine as you are fine tuning physics here and it applys to all engines... also a light weight pully will add power but not as much as the UD indeed, the benifit is you still keep the same level of functionality of the alternator, A/C and PWS.
MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267
-
kinkyllama
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
Would this work for the u20sed?MMamdouh wrote:, i only found a lighter crank pully for the 2.0 engine out of a '97 Opel Vectra.
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
i am not sure man... we used the pulley on a T20SED so if the U20SED & T20SED share the same pulley then it will defenatly work.
MMamdouh
MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267
woodae: so far yes... unless i could find some equavlent part from an Opel just like i did with the 2.0... will let you know for sure if i got lucky.
kinky: here is a couple of pics for the pulley i was talking about... i don't know if that is a T20SED but it looks very much the same and the pulley is identical to the OEM one we got.
MMamdouh
kinky: here is a couple of pics for the pulley i was talking about... i don't know if that is a T20SED but it looks very much the same and the pulley is identical to the OEM one we got.
MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267