Injectors from GM series cars that fit daewoos

[delphis]

MMamdouh do you know what kind of injectors will fit our cars from the gm series of car?

[MMamdouh]

not really sure man but we got loads of OPEL cars here and i heared a roumor that some of the injectors of them work perfictly on our cars... even better than ours, will try to get a cross reference or so and get back to you.

MMamdouh

[PrecisionBoost]

I posted a cross reference of a few hundred injectors at one point..... I will see if I can dig up the link again.

[delphis]

heh I leave for a few hours and a question I asked turned into a thread amazing guys....very useful information indeed about cross refrencing injectors from other vehicles. It would be cool to see if some of the chevy or opel injectors have a higher psi then ours for turbo applications.

[chronoti]

it's not the injector that changes the PSI that the regulator and pump. (more so regulator than pump) diffrent flow rate, but all injectors are bascialy fit in 2 Main catagory and then another 2 under that and then another what ever under that.

main: high (c & e) or low impedance (d&f)

1st sub: top or side feed

2nd sub: diffrece in connectors

http://www.suprasonic.org/public_html/s ... Ctech.html

very good back ground info on injectors

http://www.geocities.com/MotorCity/Pit/ ... ctors.html

has pictures of the diffrent conenctors (4 main types)

[Audacity Racing]

^^^ +1


you can use any injectors that fit the same impedence and type. it's not that hard to figure out . there are all kinds of injectors that fit the daewoo

[RichieOzzie]

Just make sure you dont go for too big a flow rate, or it will flood the motor, or run over rich!!... been there, tried it, and blew it!!!