Leganza Intakes on lanos ????

dhd · Post by **dhd** » Fri Nov 04, 2005 9:27 pm

In my research for Leganza 2.2 eng
I meet up with man has a Leganza Intakes and he want to sell it
The

is can I feet the Leganza Intake on my lanos 1.5 eng.

MMamdouh · Post by **MMamdouh** » Sat Nov 05, 2005 12:18 am

the 1.5 SOHC intake is too different than the 2.2 intake, you can't swap both intakes.

MMamdouh

dhd · Post by **dhd** » Sun Nov 06, 2005 9:23 pm

what about 1.6 intake

and is there will be differnt

AcingTeam · Post by **AcingTeam** » Sun Nov 06, 2005 9:53 pm

dhd wrote:what about 1.6 intake
and is there will be differnt

should be identical.

MMamdouh · Post by **MMamdouh** » Sun Nov 06, 2005 10:59 pm

no Acing it is totaly different... the 1.5 SOHC got one intake valve per cyl. so the intake plumbing is smaller and circular where the tubes are oval on the 1.6 intake... logically the flange will be different.

also we have no VGIS so getting that to work on the 1.5 SOHC is going to be hard if it is doable at all. also their is a coolant passage on the 1.5 intake which will have no rout on the 1.6 intake.

1.5 intake

1.6 intake

the only common thing is the TB... only difference is the direction of the coolant pipes at the bottom where the 1.5 TB pipes point downwords while the 1.6 TB pipes points to the opposit direction of the air flow.

MMamdouh

AcingTeam · Post by **AcingTeam** » Mon Nov 07, 2005 12:53 am

mmamdouh wrote:no Acing it is totaly different... the 1.5 SOHC got one intake valve per cyl. so the intake plumbing is smaller and circular where the tubes are oval on the 1.6 intake... logically the flange will be different.

also we have no VGIS so getting that to work on the 1.5 SOHC is going to be hard if it is doable at all. also their is a coolant passage on the 1.5 intake which will have no rout on the 1.6 intake.

1.5 intake

1.6 intake

the only common thing is the TB... only difference is the direction of the coolant pipes at the bottom where the 1.5 TB pipes point downwords while the 1.6 TB pipes points to the opposit direction of the air flow.

MMamdouh

I thought we were just talking about the tubing from the intake manifold and a filter.

MMamdouh · Post by **MMamdouh** » Mon Nov 07, 2005 8:48 am

if you are talking about that then the stock air box is the same for the 1.5 and 1.6 lanoses... the rubber hose however is shorter on the 1.6.

for aftermarket intakes i guess you can use a longer pipe on the 1.5 as it got smaller intake, the civic pipe might work fine on a 1.5 without the need for cutting and all.

MMamdouh