Problem with projectors.

mocpac · Post by **mocpac** » Mon Jun 27, 2005 2:03 am

I receive yesterday the PROJECTORS. I connect them to the car and ahhhhrggg.... the projector don't turn on. The hight beam turn on and the signals. Is not a problem with the projector aparently, the hight beem turn on when I turn on the signals and stay on when a tur on the lowbwm and when I turn one hte hight.

I chk the plugs. The nubira plug have 5 wires like the projectors but the regular lights just have 3. So the regular light do not use 2 wires. But they are there and work fine.... So whats the problem with the projectors if that 2 estra cables are for them?

Any help here?

PD
By the way they look awesome.

mocpac · Post by **mocpac** » Mon Jun 27, 2005 3:14 am

TEORY:

oem light have just 3 conectors.

00
123

the projector have 5

12
345

but the car also have 5

12
345

I think the projectors in corea are the correc lights in the nubi like the leganza. When they bring it to america or when thay export it from korea they cahgne it to 1 light low and hight. so thay cahnge the wires.

14
325

for the new lights.

GsiTurbo · Post by **GsiTurbo** » Mon Jun 27, 2005 5:12 am

You could check with the mutlimeter, which connector prong is for what (low beam, high beam, turn).

Use the old headlamps to determine the plugs. Then, with the new ones, do the same. You may have to change over wires. Pics are always great too!!

If there is still a problem, post the details and we will figure it out.

I am glad they arrived safe and sound.

Tom

MMamdouh · Post by **MMamdouh** » Mon Jun 27, 2005 10:12 am

yes... it sounds so much like miss matched wiring pattern... you got to customize your wires to be compatable with the head lights you got, it is a no big deal for a guy with some electrical knowledge.

MMamdouh

mocpac · Post by **mocpac** » Tue Jun 28, 2005 1:52 am

Ok thanks to rusty2k and his expertice in electricity we resolve the problem.

We start checking the pos and the neg. in the 3 positions, signals, low and hight. Then we make a diagram. Analice wich cable move and where...

At the end Rusty2k say hey

-Gary the projectors no have light bulbs...
-WHAT!!!!!!!!!.....

so we stop at pepboy and buy a set of h1 (h3 out of stock) and now I have half of the lights...

Tomorrow I will buy the Silvania Silver Star h3.

Stupid me...

see the diference between the delux lights and the hight beam silvani silverstar... They look white but the flash make them yellow.

but they are real bright

GsiTurbo · Post by **GsiTurbo** » Tue Jun 28, 2005 1:54 am

LOL

MMamdouh · Post by **MMamdouh** » Tue Jun 28, 2005 8:11 am

MMamdouh

TheGreatAndPowerfulOz · Tue Jun 28, 2005 8:17 am

That's like buying seats with no car around them and wondering why you aren't going anywhere. LOL

mocpac · Post by **mocpac** » Tue Jun 28, 2005 10:44 am

I always said. "the more Knowledge we get, more mistakes we make, because we forget how to do basic things".

But they are fine thats the good thing. And I accept my mistake.

"We fall just to learn how not fall again"
-Mr. Waine

daewooluvr · Post by **daewooluvr** » Tue Jun 28, 2005 1:15 pm

mocpac_ser wrote: -Gary the projectors no have light bulbs...
-WHAT!!!!!!!!!.....

hahahhahaha

Sounds like something I would do...

MMamdouh · Post by **MMamdouh** » Tue Jun 28, 2005 1:54 pm

it happens you know... i once poured oil into my engine during an oil change and after i poured nearly half of it i noticed that my drain plug is on my fire wall.

MMamdouh

mocpac · Post by **mocpac** » Wed Jun 29, 2005 10:50 am

ok at last after my second mistake.... Both lights ara H1 no h3 and H1.

Well tha las pic..

damian007vk · Post by **damian007vk** » Wed Jun 29, 2005 3:18 pm

custom halo projector headlights needed and in great demand for lanos. hint hint 360 dynamics

The original daewootech forum

Problem with projectors.

Problem with projectors.

custom proj needed