front bumper removal

[orangelmo]

does anyone have any diagrams how to remove it?

[daewooluvr]

does anyone have any diagrams how to remove it?

It's pretty easy.

Take off the headlights (two bolts, and one nut on each side)
Then there's 5 push in plastic tabs holding the bumper cover on top.
I think there's 4 of the same tabs on the bottom of the top bar of the bumper cover.
And I believe two on the inside of each fender.

That should be it.

[orangelmo]

so the fender needs to be taken off or can it be done without doing that

[daewooluvr]

so the fender needs to be taken off or can it be done without doing that

Once the headlight is out you can reach back to access those tabs/bolts.


Also forgot to add the bolts for the wheel well liner.

[lanos2001]

i'm not sue on how many bolts there are and shaun should be right on it but all i did was just looked for the bolts and went at it. not that hard. why are you taking it off?

nick

[DavesDaewoo]

for the ammount of times ive put on and off my bumper for the custom R34 i can tell you that Shaun is absolutely right, right down to the number of push / screw ins on the top portion and bottom, as well as the fender and the mudguard ones, and headlights, only one he forgot, there are 2 bolts on the headlights and one nut on each LOL, other then that exactly what shaun said

[daewooluvr]

Take off the headlights (two bolts, and one nut on each side)

[orangelmo]

thanks all, yea i missed the bolts behind the head light. had to assess something that happened in the snow