HOW TO CHANGE THE Lug Bolts Nuts FOR REGULAR

mocpac · Post by **mocpac** » Fri Jul 23, 2004 5:31 pm

i buy my new wheels when I try to put them with the Lug Blots Nuts of the car. Wrong, they was too bigs. So i try to buy 12 Lug Bolts Nuts because I already have 4 of them. Well no one have them here. And I dont what to wait 1 wheek for an ending ebay auction. So this is the mod to change them for regular lugs. So you can use normal nuts.

First,

Materials

1- Screws Glue
2- doble side Screws (16)
3- lock nuts (16)
4- Alen Screw driver
5- Lug Bolts Nuts (In my case I will use 4 Lug Bolts Nuts )

thisis one of the sides of the sdrew (you will need the alen screw driver)

mocpac · Post by **mocpac** » Fri Jul 23, 2004 5:44 pm

This is how looks the rear Disk area (stock).

Just Put one drop of glue in one side of the screw. (just one or you willn't be able to remove them in the future).

Use the Alen Screw driver to press the screws. The glue is to keep the screws inside, so the bibration when you drive don't take them out.
**I use just 3. ***

Final Project

Let me clean my car and I will put the pic with the new 17" shoes.