looking for some parts... OE cat, Lanos, Aveo, Forenza, Nubi

daewoomofo · Post by **daewoomofo** » Sun Jul 20, 2008 6:10 pm

so yes or no do you want the flex pipe or second cat along with the first cat?ill go to moms today or tomorrow and get what you need/want.

GsiTurbo · Post by **GsiTurbo** » Sun Jul 20, 2008 10:08 pm

It was the horizontal section that was precisely 2" shorter. Otherwise, it was 100% fit.

gse_turbo · Post by **gse_turbo** » Mon Jul 21, 2008 12:07 am

I'll take whatever will unbolt. I'd like to be able to make bolt-in parts for it so if you have to cut anything just to get it out that you don't have to worry about it.

thanks Tom I'll be taking that into consideration... how did the flange fit?

Garrett

daewoomofo · Post by **daewoomofo** » Mon Jul 21, 2008 3:40 am

ill cut it after the flange. so ill get both cats and the flex pipe. u want the rear brake line?

kinkyllama · Post by **kinkyllama** » Mon Jul 21, 2008 8:06 pm

gse_turbo wrote: hey Danny, I might have to take you up on the offer, I'll see what Mofo's got since I'll be likely neeing some other goods from him. having the test pipe sent would likely be less expensive. we'll have to get some PM's going to workout the details.

Garrett

Kkay just lemme know

daewoomofo · Post by **daewoomofo** » Mon Jul 21, 2008 11:39 pm

what a pain in the ass! i got your first cat, flex pipe, and second cat. you owe me a beer for that.

gse_turbo · Post by **gse_turbo** » Tue Jul 22, 2008 4:33 pm

sounds like a deal!

...sorry I missed it in my last post but ya it wouldn't hurt to actually have the lanos lines. I had lines made for the lemans and I was just going to find a lanos to compare them with but having them out of the car would be perfect... I'll get you the rears as soon as they are made.

Garrett

daewoomofo · Post by **daewoomofo** » Tue Jul 22, 2008 9:17 pm

cool, ill try to get them this week end. i put literal usage to the joke "you might be a redneck if you mow your lawn and find a car" the weeds around the parts car are taller than it is, but ill get you a rear line hopefully this week end, if not then next week for sure!

gse_turbo · Post by **gse_turbo** » Sat Jul 26, 2008 9:02 pm

ok so I got the outlet gasket and finished up the program for it. I actually did three, one in 2.0", 2.5" and 2.75". from the gasket, it looks like it 2.75" out of the cat and maybe tappers down after that. can someone shed some light on this. is it really 2.75" out of the cat or is the port on the gasket over sized for some reason.

Garrett

daewoomofo · Post by **daewoomofo** » Sun Jul 27, 2008 12:40 am

if its for a lanos ill measure for you, just let me know

gse_turbo · Post by **gse_turbo** » Mon Jul 28, 2008 5:57 am

... ya that's what the gasket is for, thank you.

daewoomofo · Post by **daewoomofo** » Mon Aug 11, 2008 10:00 am

hey i got your brake line, ill try to get a shipping quote this week, then send every thing out soon after.

mikedudley17 · Post by **mikedudley17** » Tue Aug 12, 2008 2:35 am

hey garret, we still on? gimme a call and i can work out the shipping details with ya. ill be around in the afternoon all week...

gse_turbo · Post by **gse_turbo** » Tue Aug 12, 2008 4:47 pm

sounds good I'll give a call as soon as I can

mikedudley17 · Post by **mikedudley17** » Wed Aug 27, 2008 12:26 am

bump for update.