New Ride planing on turboing !!! 2008 Subaru Impreza 2.0 Rx
Moderators: daewoomofo, Moderators Group
-
- Posts: 92
- Joined: Mon Mar 07, 2005 11:56 pm
- Location: Haram, Cairo
- Contact:
New Ride planing on turboing !!! 2008 Subaru Impreza 2.0 Rx
Hey guys how ya all doing , hope ur all doing gr8 , i know i havnt been here for a while been doing alot of changes lately , move to another country and job so havnt had a chance to do any projects or stay intouch but now im bk , I just bought an 08 Impreza 2.0 and im planing on turboin it , so any 1 know any1 who turbo'd a sub b4 ? its 150 hp 197 trq i think 10.5 C/R , so i was thinkin of two options
first is to build up an engine Sti or Wrx and swap it in the car
second is to turbo the current one in the car
so guys help me out on this project
heres some pix
http://www.facebook.com/photo.php?pid=4 ... =502332859
http://www.facebook.com/photo.php?pid=4 ... =502332859
http://www.facebook.com/photo.php?pid=4 ... =502332859
http://www.facebook.com/photo.php?pid=4 ... =502332859
http://www.facebook.com/photo.php?pid=4 ... =502332859
http://www.facebook.com/photo.php?pid=4 ... =502332859
first is to build up an engine Sti or Wrx and swap it in the car
second is to turbo the current one in the car
so guys help me out on this project
heres some pix
http://www.facebook.com/photo.php?pid=4 ... =502332859
http://www.facebook.com/photo.php?pid=4 ... =502332859
http://www.facebook.com/photo.php?pid=4 ... =502332859
http://www.facebook.com/photo.php?pid=4 ... =502332859
http://www.facebook.com/photo.php?pid=4 ... =502332859
http://www.facebook.com/photo.php?pid=4 ... =502332859
Re: New Ride planing on turboing !!! 2008 Subaru Impreza 2.0
all u need is the supported fuel mods like Apexi Neo Walbro 255 and 560cc injectors
i read in the street turbocharging book that 90-100hp per cubic inch of displacement u can use stock cast pistons anymore u should use forged
also i read the exhaust diameter for a single exhaust at 250hp should be 2.25" and 300 3.0"
i read in the street turbocharging book that 90-100hp per cubic inch of displacement u can use stock cast pistons anymore u should use forged
also i read the exhaust diameter for a single exhaust at 250hp should be 2.25" and 300 3.0"
-
- Posts: 92
- Joined: Mon Mar 07, 2005 11:56 pm
- Location: Haram, Cairo
- Contact:
-
- Posts: 92
- Joined: Mon Mar 07, 2005 11:56 pm
- Location: Haram, Cairo
- Contact:
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
-
- Posts: 92
- Joined: Mon Mar 07, 2005 11:56 pm
- Location: Haram, Cairo
- Contact:
-
- Posts: 92
- Joined: Mon Mar 07, 2005 11:56 pm
- Location: Haram, Cairo
- Contact:
- BosnianLanos
- Expert
- Posts: 1661
- Joined: Thu May 27, 2004 10:31 pm
- Location: Clearwater, Florida
- Contact:
http://forums.nasioc.com/
I don't really see the problem. If you turboed a Lanos, the Subaru shouldn't be that much harder.
Keep in mind, this is a mostly North American forum. We don't get the 2.0 Subarus here. The smallest engine we get is a 2.5 turbo.
I don't really see the problem. If you turboed a Lanos, the Subaru shouldn't be that much harder.
Keep in mind, this is a mostly North American forum. We don't get the 2.0 Subarus here. The smallest engine we get is a 2.5 turbo.
-
- Posts: 92
- Joined: Mon Mar 07, 2005 11:56 pm
- Location: Haram, Cairo
- Contact: