Nexia Turbo 13.6@17psi, specs page 2.

[nexia182]

Looks good m8. Me and a friend threw out on of those 8v engines. Didnt know the comp was so low standard. WIsh i hadda read the engine code.


Ah well. I like your dash cluster. Where'd you get the white dials? ANd what's it look like in the dark?

white dials were made here in colombia.......

[nexia182]

what are the model & specs of those injectors? Whats the flow rate?
From which car? Any GM Part number?

I am also looking for uprated injectors to support my upgrades.

those fuel injectors are from stock supra 550cc or 50LBS/H, how ever you can buy universal injectors like:

http://store.summitracing.com/egnsearch ... ults=false

[Pir0]

Damn. Wish they came in MPH like that. I'd buy a set in the morning if they did.

[AntDX316]

because hondas do over 300-400+hp with just 6-8 ps

Sorry but i don't think that's really a valid point again... Anyone getting over 300bhp with around 8psi in a honda powered car, will have to be with the 2.0 or 2.2vtec. No way will you get near that power with the 1.6 16v vtec engines. 8psi+other mods, maybe... but not only boosting 8psi alone.. The oly reason those 2.2's get over 300bhp so easy is because of what they are to start off with, they're over 200bhp n/a.

sry to burst ur bubble but there r many D16 SOHC Stock Internals which is 1.6L that do that much hp search youtube

How many of them run only a turbo at 6-8psi, and no other modification, that you know off, for a fact. I could put a vid of a car driving past me on youtube and claim it to be 300bhp, doesnt mean it is.

also another one to consider is timing

[nexia182]

those white dials cost about 85 dollars

[Pir0]

Aye but in Northern ireland it's mph not Kmph. So it wouldnt pass the MOT test And i couldnt be arsed with kmph dials, would have to be mph

[nexia182]

it doesnt matter, if you want can be in mph