I figured it just fell through or you bought it. hmmBosnianLanos wrote:LoL, I had dibs!
But I posted like 3 weeks ago and still no answer...dammit...
Lowered $$ or TRADE ! Lanos Strutbar . New, never used
Moderators: daewoomofo, Moderators Group
-
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
-
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
Thanks!daewoomofo wrote:even if this is still available you prolly dont want it danny. i know your gonna put a 2.0 in your lanos, and from waht ive heard this strut bar wont clear the throttle body. hopefully some one can say for sure but i remember hearing some where that it wont clear.
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
- greenbluewoo
- Expert
- Posts: 375
- Joined: Thu Sep 23, 2004 7:44 pm
- Location: New Hampshire
- Contact:
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
-
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
Looks like it wouldn't, barley. How much room is there between the top of the strut brace (over the TB) and the hood? I could always use spacersdaewoomofo wrote:the throttle body clears it but would the intake?
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
looking at this pic i dont think this is the shark raceing strut bar. i have one and it looks similar to this but different.
![Image](http://www.postimage.org/aV1HmaV9.jpg)
![Image](http://www.postimage.org/aV1OvCVr.jpg)
notice how much longer the angled pieces are on my strut bar. the angled pieces on the white cars strut bar are shorter and on a sharper angle. there is only an inch and a half from the top of my intake mani to the bottom of the strut bar. i dont know how hight the 2.0/2.2 throttle body sits up so it still might be in the way.
![Image](http://www.postimage.org/aV1HmaV9.jpg)
![Image](http://www.postimage.org/aV1OvCVr.jpg)
notice how much longer the angled pieces are on my strut bar. the angled pieces on the white cars strut bar are shorter and on a sharper angle. there is only an inch and a half from the top of my intake mani to the bottom of the strut bar. i dont know how hight the 2.0/2.2 throttle body sits up so it still might be in the way.
- greenbluewoo
- Expert
- Posts: 375
- Joined: Thu Sep 23, 2004 7:44 pm
- Location: New Hampshire
- Contact:
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
-
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
Yeah we'll probably just build a new one...we've done sway bars before. I want to tie it into the firewall and possibly use a torque damper on the engine.Pir0 wrote:Why not just make one that goes around it? It'd probably be cheaper to get a shop to bend it. Or make one in 2 parts, that go from each strut top to the bulkhead like the Celica GTs/GT4s came with..
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama