D16 Final drive swap?
Moderators: daewoomofo, Moderators Group
- PrecisionBoost
- Super Moderator
- Posts: 4437
- Joined: Thu Jun 19, 2003 5:59 am
- Location: Edmonton, Alberta, Canada
Sorry. I seldom come to forum recently. Real busy with my work. So never noticed your question.gse_turbo wrote:what did the 4.176 gear come from? do you have contact info and or a part number?
Garrett
The 4.176 final drive is abt $400+ us dollar. I calculated wrongly. Becos the exchange rate change quite a lot recently. I calculated based on old rates. Bought it from Korea through a korea friend. Waiting for the stocks to arrive to Singapore now. Once I got the part number I will let you know. I also duno whether its a standard GM parts or its aftermarket part. If its aftermarket, there will not be any GM part number.
Aveo 1.7M DOHC
I have just gotten my final drive ratio kit. Its only consist of2 piece. One piece of long rod with a small gear on it and another piece of huge gear. It stated 4.591 ratio. Thats a huge difference from my 3.944. How to determine the final drive ratio from inspection to confirm its 4.591?
Now hopping to try to get a workshop to fix it into my drive. And see the result.
Now hopping to try to get a workshop to fix it into my drive. And see the result.
Aveo 1.7M DOHC
The box actually does not tally with the items inside. Its a 4.176 final drive. Still waiting for the flywheel and clutch before I fix them in. The labour to fix the final drive, flywheel and clutch here in sinagpore is abt $200 + 2 days waiting. So wait for everything to arrive before I one shot fix them in.
The total damage is more than $400US to reach Singapore. Costed me $600+US including shipping and the inter bank telegraphic fund transfer charges.
The total damage is more than $400US to reach Singapore. Costed me $600+US including shipping and the inter bank telegraphic fund transfer charges.
Aveo 1.7M DOHC
This is the 4.176 final drive kit.
Getting it installed now as my engine is being rebuilt with the following.
Aveo 1.4M DOHC engine (Soon to be 1.7M DOHC)
Lanos Crankshaft + SUMMIT Lightweight Crankshaft Pulley
81.0mm Wiseco piston 11.1:1 High Compression
Forged H-Beam Con Rods + ARP
Cometic Head Gasket + ARP Head Bolts
Opel 4Kg flywheel + Opel Clutch Cover + Lanos Clutch Pad + ARP Flywheel bolts
Lanos Camshaft regrinded to 285 Fast Road Cams
RPM Adjustable Venier Cam Pulley
AEM CAI System
Long 4-1 Header + 2.75" Hotbits Center Bullet + 2.75" Hotbits Muffler
4.2 Final Drive Kit
Walbro 255 Fuel Pump + Sard Fuel Regulator
Dastek UNICHIP
BC Coilover Fully adjustable in preload, height and 32 step shock hardness/softness
Summit Strut Bar + lower front tie bar + lower mid tie bar
OZ Ultraleggra Titanium Rims with 205/40/ZR17 Maxxis Sports Tyres
Getting it installed now as my engine is being rebuilt with the following.
Aveo 1.4M DOHC engine (Soon to be 1.7M DOHC)
Lanos Crankshaft + SUMMIT Lightweight Crankshaft Pulley
81.0mm Wiseco piston 11.1:1 High Compression
Forged H-Beam Con Rods + ARP
Cometic Head Gasket + ARP Head Bolts
Opel 4Kg flywheel + Opel Clutch Cover + Lanos Clutch Pad + ARP Flywheel bolts
Lanos Camshaft regrinded to 285 Fast Road Cams
RPM Adjustable Venier Cam Pulley
AEM CAI System
Long 4-1 Header + 2.75" Hotbits Center Bullet + 2.75" Hotbits Muffler
4.2 Final Drive Kit
Walbro 255 Fuel Pump + Sard Fuel Regulator
Dastek UNICHIP
BC Coilover Fully adjustable in preload, height and 32 step shock hardness/softness
Summit Strut Bar + lower front tie bar + lower mid tie bar
OZ Ultraleggra Titanium Rims with 205/40/ZR17 Maxxis Sports Tyres
Aveo 1.7M DOHC
I have got these into my Aveo installed. Now my low end improves, no more draggy 2nd gear and 3rd gear. Posted a video on utube with lighten flywheel. Will post an acceleration video after I run in the engine to show the rpm climb improvement.
The FC do not seems to change although crusing rpm at 100km/h increase slightly from 2.8k to 2.85k. Maybe due to less dragging needed.
http://www.youtube.com/watch?v=UxOtZT5GXys&feature=user
The FC do not seems to change although crusing rpm at 100km/h increase slightly from 2.8k to 2.85k. Maybe due to less dragging needed.
http://www.youtube.com/watch?v=UxOtZT5GXys&feature=user
Aveo 1.7M DOHC
Anyone knows how the speedo collect the speed data from the car? Mine speedo seems to be running lesser than actual speed. I was driving beside a civic (same speed for 30 seconds). Mine speedo is 80km/h constant while his is 87km/h. His is digital speedo, so very big numbers can see from beside him.
My wheels are 205/40/ZR17. Stock size is 155/80/R13.
How does the wheel size and final drive kit affect the speedo accuracy?
My wheels are 205/40/ZR17. Stock size is 155/80/R13.
How does the wheel size and final drive kit affect the speedo accuracy?
Aveo 1.7M DOHC