Transmissions, Clutches, torque converters, Gear ratios, Brakes, Pads, etc.
Moderators: daewoomofo, Moderators Group
-
GsiTurbo
- Super Moderator
- Posts: 1791
- Joined: Thu Mar 13, 2003 10:56 pm
- Location: Edmonton, Alberta, Canada
-
Contact:
Post
by GsiTurbo »
I was just lurking on the j-body.org, 2nd gen sunbird forum, and found some interesting information.
Quote:
http://www.j-body.org/forums/read.php?f ... 87&t=60287
Fidanza 8lb alum flywheel.... note how close does it resemble our C20GET/T2XSED/U20SED 6-bolt dish flywheel. Possible match?
Everything is going onto, what seem to be the 2.3l or 2.4l DOHC block
This is definitely something worth investigating further....
__________________________
2002 Lanos 1.5 SOHC... stock!!!
-
gse_turbo
- DTM Daewoo Mod
- Posts: 2394
- Joined: Fri Jun 23, 2006 4:20 am
- Location: Englewood, Colorado United States
-
Contact:
Post
by gse_turbo »
Fidanza makes 9.5lbs steel units and 8lbs alu ones specifically for our motors. MSRP is between $440 and $500 depending on which type.
that is interesting that the Quads used a 6-bolt pot style (so does the "Saturn" Astra 1.8)
I'll have the tech at Fidanza run down some specs and see if its a match.
Nice fine Tom.
