everything under this forums belongs to Holland Sport Performance, previously known as: Daft Art Performance.
Moderators: daewoomofo , Moderators Group
gse_turbo
DTM Daewoo Mod
Posts: 2394 Joined: Fri Jun 23, 2006 4:20 amLocation: Englewood, Colorado United States
Contact:
Post
by gse_turbo Sat Jan 05, 2008 12:43 am
DAFTART.COM
Well there's no time like the present to launch a site spacifically for the GMDAT builder.
Everything listed or talked about on the forum is listed on the site.
Some of the pages are still being filled but as long as I'm paying for the site I'm not going to waste any time.
Come check it out and let me know what you think. If you have any suggestions I'd be glad to hear them.
Last edited by
gse_turbo on Thu Jan 17, 2008 11:30 pm, edited 1 time in total.
exist3nce
Expert
Posts: 1233 Joined: Mon Oct 25, 2004 2:24 amLocation: Toronto, Canada
Post
by exist3nce Sun Jan 06, 2008 1:01 pm
Checked out your site, looks like a great start!
2004 Optra/Forenza/Lacetti - 225whp - Haltech Sprint500 - CT12B - Getrag F28 6spd - KW V3 Coilovers - FX35 Retrofit
Pir0
Expert
Posts: 1256 Joined: Tue Nov 27, 2007 9:25 pmLocation: Ireland
Post
by Pir0 Sun Jan 06, 2008 4:39 pm
Nice site, hope things go well with it m8. All the best.
SAZ
---------------------
gse_turbo
DTM Daewoo Mod
Posts: 2394 Joined: Fri Jun 23, 2006 4:20 amLocation: Englewood, Colorado United States
Contact:
Post
by gse_turbo Sun Jan 06, 2008 9:54 pm
thanks guys!
gse_turbo
DTM Daewoo Mod
Posts: 2394 Joined: Fri Jun 23, 2006 4:20 amLocation: Englewood, Colorado United States
Contact:
Post
by gse_turbo Wed Jan 16, 2008 8:36 pm
UPDATES TO THE DAFT ART WEBSITE! turbo components under the "Universal" category
greenbluewoo
Expert
Posts: 375 Joined: Thu Sep 23, 2004 7:44 pmLocation: New Hampshire
Contact:
Post
by greenbluewoo Thu Jan 17, 2008 3:45 am
I wish I new you were going have couplers and the bov pipe because I just bought 5 couplers and a bov pipe the other day I would of just bought them off you
2.0 engine swap in the works
daewooluvr
Expert
Posts: 3052 Joined: Fri Mar 28, 2003 3:51 amLocation: York, PA
Contact:
Post
by daewooluvr Thu Jan 17, 2008 1:24 pm
Looks good.
gse_turbo
DTM Daewoo Mod
Posts: 2394 Joined: Fri Jun 23, 2006 4:20 amLocation: Englewood, Colorado United States
Contact:
Post
by gse_turbo Thu Jan 17, 2008 5:50 pm
oh well theres always the future. are they the same quality as the ones I have listed? what where the prices?
thanks daewooluvr
woo_sleeper
Posts: 92 Joined: Mon Mar 07, 2005 11:56 pmLocation: Haram, Cairo
Contact:
Post
by woo_sleeper Thu Jan 17, 2008 7:13 pm
Gr8 work man , just a quick Q do u ship out side the states ? i live in cairo egy , would u ship stuff here ?
greenbluewoo
Expert
Posts: 375 Joined: Thu Sep 23, 2004 7:44 pmLocation: New Hampshire
Contact:
Post
by greenbluewoo Thu Jan 17, 2008 7:17 pm
there made by zena racing same ones that gsiturbo has on his car I think there a little more expensive than yours I bought them on ebay oh and yeah they seem the same quality as yours
2.0 engine swap in the works
gse_turbo
DTM Daewoo Mod
Posts: 2394 Joined: Fri Jun 23, 2006 4:20 amLocation: Englewood, Colorado United States
Contact:
Post
by gse_turbo Thu Jan 17, 2008 7:22 pm
greenbluewoo... sounds goodperhaps next time...
woo_sleeper... Pm me with your address and I will see now much it is. I have no problem shippping anywhere but the last time I checked, shipping a header flange was more expensive than the part.
what parts are you looking for?
gse_turbo
DTM Daewoo Mod
Posts: 2394 Joined: Fri Jun 23, 2006 4:20 amLocation: Englewood, Colorado United States
Contact:
Post
by gse_turbo Thu Jan 17, 2008 11:29 pm
that's right, we are the only place to get these hard to find gaskets and I guarantee they are lower then MSRP!
jidasas
Expert
Posts: 640 Joined: Sun Nov 20, 2005 8:36 pm
Contact:
Post
by jidasas Thu Jan 17, 2008 11:58 pm
so the mls head gasket allows how much boost if i had upgraded pistons etc.?
gse_turbo
DTM Daewoo Mod
Posts: 2394 Joined: Fri Jun 23, 2006 4:20 amLocation: Englewood, Colorado United States
Contact:
Post
by gse_turbo Fri Jan 18, 2008 12:15 am
actually there is a SUPER thick .089" head gasket available that is pushing near double the factor which would allow quite a bit aside from the fact that it's stronger.
