Parts FS:Forenza/reno, LANOS, and some universal stuff.

[kinkyllama]

Too many parts to start listing prices. PM me about a part and I'll give you a qoute. Shippings from 85254. Cheers



Forenza/reno/optra specific:

-fog light hole covers; forenza. USED.

-Center arm rest; forenza. USED

-front ciggertte tray; forenza. USED.

-rear view mirror; forenza. USED

-Front OEM brake calipers w/ lines & used pads. USED.

-Custom mount for a wilwood external slave for F28 conversion w/ external slave. BOLTED UP BUT NOT USED.

-window washer fluid resovoir/pump/tubing. USED.

-hood prop w/ mounting station. USED

-Fog lights w/ bulbs; forenza. USED (was only mounted on the car for a few months, never wired)

-Driver side STIFFENED motor/tranny mounts. Engine part only. x4 USED(under 10k miles).

-OEM cloth seat. Driver OR Passenger (I need one for my GT4 wheel). USED.

-ECU for m/t; $150 obo

-Lacetti5 badges (the "5" is seperate). NEW

-Facotry horn. USED

-Nology spark plug wires. $185 new. USED 15k miles

-Forenza OEM headlights w/ inside painted black. Scuffed up a bit. USED.

-possibly factory rotors . USED.

-Rear fender/mud thingys. USED

-Front OEM size slotted rotors machined once. USED.

-top front strut dust covers. USED

-First OEM CAT for forenza/reno x2. USED (one has 4k miles). For extra I can hollow it out and/or weld a staight pipe in it so it'll be a CAT delete pipe

-x2 factory exhaust manifold

-x2 factory exhaust mani heat shields

-Factory TB. SOLD!

-Fuel inectors. 4k miles.

-Spark plug wires. 4k miles.

-2x factory thermostats. 4k & 80k miles.



Universal:

-MLS head gasket. NEW.

-Flat style flywheel. USED

-carbon fibre three gauge pod for dash. NEW

-G-force 4-point racing harness' in blue. Used for a few weeks at most.

-blue lightweight lug nuts. NEW

-Chrome lug nuts. NEW

-Willwood external tranny slave. BOLTED UP BUT OTHERWISE UNUSED

-OEM steelies. 15x6" 4x114.3. Some curb rash. 10k miles only. SOLD!

-Nissan R34 front bumper(perfect fit to build a slight wide body kit), some aveo side skirts (correct length for forenza/reno), and nissan R34 rear bumper molded to a forenza rear bumper...the rear bumper will bolt onto a forenza but one of the corners below the tail light sticks out a tad, I'm not really sure why but it shouldn't be a hard fix.

-Oil cooler kit with oil filter relocation. NEW/USED.

-ebay style grounding kit. blue. ONLY BOLTED UP

-blue oil catch tank. Pretty nice. USED for a week

-various H1 and H7 bulbs. NEW

-orange turn singal bulbs. USED

-3x Blue Oil vapor breather filters. NEW $10ea

-2x Blue license plate bulbs (194, T11, ect). $10

-Spare wheel/tire

-Kenwood Sirius satellite radio brain with lifetime subscription. Includes antenna. $400 OBO
I don't think Sirius offers lifetime subscriptions anymore(at least online). There best
package is two year subscription for $272 so this is a great deal.

Waiting to come off the lacetti:


-Forenza/reno Rear OEM brake calipers

-Forenza/reno Rear slotted OEM style rotors



Lanos parts, from 137k 2001 lanos sport

-137k mile lanos 1.6l engine with P&P head, TB, and intake manifold. Timing belt went on it. $900 OBO (the high side of what running stock 1.6s go for). Willing to work something out with getting it running. Motivated to get it sold ASAP so if you can send payment now make me offers!

-Anything engine related, I will probably be parting out some of it

-Lanos sport leather peices. Would prefer to trade for the cloth peices but a trade would need to be done before mid-April unless you wanna wait till your peices arrive before I removed mine. Or willing to sell for whatever I can get the cloth versions locally ($400+).

-Custom intake and cleanable/reusable air filter. Best offer

-All A/C related peices. $200OBO

-2.25" pro-one header back exhaust. Sounds amazing. $200OBO

-Window washer fluid resvoir

-Rear window wiper motor, arm, and nozzle.

-Under hood padding thingy

-A/C controls?

-Spare wheel/tire and jack (eBay'd)

-Antenna


Sometime down the road I'd like to sell these...:

-1.25" Eiback lowering springs. $90OBO

-Factory shocks/struts. Brand new boots for shocks. Best offer


If you guys are looking for any forenza/reno or lanos parts I haven't listed just send me a PM, I might have it afterall.[/b]

[kinkyllama]

Forenza/reno/optra specific:
-ECU for m/t; $150 obo
-Lacetti5 badges (the "5" is seperate). NEW
-Facotry horn. USED
-Nology spark plug wires. $185 new. USED 15k miles

Universal:
-Nissan R34 front bumper(perfect fit to build a slight wide body kit), some aveo side skirts (correct length for forenza/reno), and nissan R34 rear bumper molded to a forenza rear bumper...the rear bumper will bolt onto a forenza but one of the corners below the tail light sticks out a tad, I'm not really sure why but it shouldn't be a hard fix.

Waiting to come off the car
-First OEM CAT for forenza/reno

Edited the post to add these. Cheers

[xtreme 2]

any pics of the body kit?

[kinkyllama]

any pics of the body kit?

Theres the rear before molded to the forenza rear bumper. It's black now though, and needs to be sanded, and touched up.


The front is just like an other R34 front, and I think the side skirts are for an aveo...but I'm not 100% if I wanna let this go yet.

[kinkyllama]

Forenza/reno/optra specific:
-Forenza OEM headlights w/ inside painted black. Scuffed up a bit. USED.
-possibly factory rotors (if there's intrest I'll check to see if I have both sides). USED.
-Rear fender/mud thingys. USED
-Front OEM size slotted rotors machined once. USED.
-top front strut dust covers. USED

Universal:
-Oil cooler kit with oil filter relocation. NEW/USED.
-ebay style grounding kit. blue. NEW.
-blue oil catch tank. Pretty nice. USED for a week?
-various H1 and H7 bulbs. NEW
-orange turn singal bulbs. USED

EDITED to add all this stuff

[mocpac]

what happened to your car?

[kinkyllama]

what happened to your car?

Nothing, these are extras.

It sucks, 2 months before I did my reno front end conversion I messed up my factory front end. I was going to try to find a forenza or reno with front end damage for cheap and put allot of these spares on it but I rather have a 2.0 n/a lanos anyways

[kinkyllama]

Forenza/reno/optra specific:
-First OEM CAT for forenza/reno x2. USED (one has 4k miles). For extra I can hollow it out and/or weld a staight pipe in it so it'll be like syiths down pipe only it looks factory.
-x2 factory exhaust manifold
-x2 factory exhaust mani heat shields
-Facotry TB

Waiting to come off the car
-Coolant resvoir

Edited to add these

[gse_turbo]

what happened to your car?

ok let me ask this question another way... what are you doing to you car!?

[kinkyllama]

Pics of the wheels, each picture is of the worst curb rash of each wheel and they'll be a 2nd picture of any wheel with curb rash in more than one spot. The curb rash on the 16" wheels has been painted over, and you can't see it other than up close.
All the wheels togather:
http://i192.photobucket.com/albums/z80/ ... C00244.jpg
17" wheel 1
http://i192.photobucket.com/albums/z80/ ... C00246.jpg
17" wheel 2
http://i192.photobucket.com/albums/z80/ ... C00247.jpg
17" wheel 3
http://i192.photobucket.com/albums/z80/ ... C00248.jpg
17" wheel 4
http://i192.photobucket.com/albums/z80/ ... C00249.jpg
16" wheel 1
http://i192.photobucket.com/albums/z80/ ... C00250.jpg
16" wheel 2
http://i192.photobucket.com/albums/z80/ ... C00251.jpg
16" wheel 3
http://i192.photobucket.com/albums/z80/ ... C00252.jpg
16" wheel 4
http://i192.photobucket.com/albums/z80/ ... C00253.jpg
16" wheel 4 again
http://i192.photobucket.com/albums/z80/ ... C00254.jpg
16" wheel 2 back
http://i192.photobucket.com/albums/z80/ ... C00255.jpg
16" wheel 3 back
http://i192.photobucket.com/albums/z80/ ... C00256.jpg

Added pics of the rota slipstreams

ok let me ask this question another way... what are you doing to you car!?

Nothing really, these are just extra stuff I have. For the oil cooler I went with a dual one to save room cause I wanted to cool the tranny oil. The fogs lights don't fit my reno front end. Then some of the forenza front end are cause I have a reno one. Then the manifolds and that stuff I replaced with performance ones. I moved to 8" wide wheels and fender flares so I know longer need the wheels. I deceided I wanted to keep the car looking near stock as far as a body kit, so people know it's not another honda. All my brakes are or are going to be upgarded to a BBK. I have some extras from trying different things. I could go on...

[kinkyllama]

-Factory TB. SOLD!

-Fuel inectors. 4k miles.

-Spark plug wires. 4k miles.

Updated to add this.

Also the wheels will be posted locally within a few days and will likely sell fast.

[exist3nce]

Do you have pics of the front headlight enclosures?

[exist3nce]

Could I also have some pics of the wilwood slave stuff? My shop is quite resourceful when it comes to fabbing custom stuff. What is the reason that you were unable to go through with it? Where did you get stuck?

[kinkyllama]

Do you have pics of the front headlight enclosures?

Yeah I'll get one tomorrow. I actually have a spare camera so it won't take two weeks.

Could I also have some pics of the wilwood slave stuff? My shop is quite resourceful when it comes to fabbing custom stuff. What is the reason that you were unable to go through with it? Where did you get stuck?

Yep. Got it mounted up and all but the clutch wouldn't ..do something. I think engage but I can't remember exactly. It may have been that the clutch flywheel combo was wrong, but I didn't want to pay to have the gearbox pulled again if that wasn't the problem. If you buy it and it ends up working, then I'll actually build another one and do that cause you know of our slave don't like to last. I'll get pics on that tomorrow as well

[exist3nce]

bump?