So here it is..
it was like this before I got my hands on it
![Image](http://img154.imageshack.us/img154/4353/img6423ua5.jpg)
![Image](http://img154.imageshack.us/img154/8466/img6417xx3.jpg)
I bought some new rims, from factory 185/65/14 I went to 215/35/18
![Image](http://img503.imageshack.us/img503/4973/img6671do6.jpg)
I had to put some track spacers on the rear axle , 2cm on each side
![Image](http://img389.imageshack.us/img389/8862/img6646ds2.jpg)
![Image](http://img389.imageshack.us/img389/2365/img6668fo5.jpg)
but then it was normaly very high , it looked like a monster truck
so , I ordered Eibach springs -30mm for it, but by mistake they gave me -30mm for Nexia , and it lowered the front about 70mm and the rear about 40mm , I was very pleased
![Image](http://img389.imageshack.us/img389/4750/img6678fw0.jpg)
![Image](http://img389.imageshack.us/img389/1392/img6679jk3.jpg)
![Image](http://img389.imageshack.us/img389/2143/img6681qa2.jpg)
![Image](http://img389.imageshack.us/img389/7216/img6684go7.jpg)
that was it for a while..
then the project started
because of the big rims, the rear brakes looked silly , so I got the rear axle from a Vectra 2.0
first I dissasembeled it..because it was rusty and didn't work ..
![Image](http://img455.imageshack.us/img455/223/img6932aqp6.jpg)
By ViperZG
I got rid of all the rust and painted it in mat black
![Image](http://img169.imageshack.us/img169/3549/img6938ie5.jpg)
By ViperZG
the callipers were repaired , fitted with new parts..
![Image](http://img264.imageshack.us/img264/49/img6957ft7.jpg)
By ViperZG
old vs. new discs
![Image](http://img264.imageshack.us/img264/318/img6939aup5.jpg)
By ViperZG
new discs painted in mat black
![Image](http://img264.imageshack.us/img264/3295/img6940alx9.jpg)
By ViperZG
all new parts fitted and assembeled
![Image](http://img264.imageshack.us/img264/6751/img6942aia1.jpg)
By ViperZG
old vs. new axle
![Image](http://img172.imageshack.us/img172/2296/img6961zb5.jpg)
By ViperZG
after a while driving and parking , I scratched a rim , so I decided to repair them and paint them
painted the inside in mat black
![Image](http://img264.imageshack.us/img264/2184/img6962tw5.jpg)
By ViperZG
very carefully I had to tape the rim to be painted
![Image](http://img264.imageshack.us/img264/4154/img6964ie5.jpg)
By ViperZG
the rims repaired and painted
![Image](http://img172.imageshack.us/img172/4905/img6968zo2.jpg)
By ViperZG
on the car with the new disc
![Image](http://img264.imageshack.us/img264/7940/img6974atk0.jpg)
By ViperZG
then it was the cars turn, so I started do take it apart
![Image](http://img172.imageshack.us/img172/6359/img6934jm3.jpg)
By ViperZG
![Image](http://img172.imageshack.us/img172/8302/img6947ik3.jpg)
By ViperZG
![Image](http://img264.imageshack.us/img264/3341/img6948bt0.jpg)
By ViperZG
and ready for some bodywork
![Image](http://img264.imageshack.us/img264/8353/img6978ais5.jpg)
By ViperZG
![Image](http://img172.imageshack.us/img172/2002/img6980adn7.jpg)
By ViperZG
![Image](http://img264.imageshack.us/img264/6962/img6982amj4.jpg)
By ViperZG
progress
all the signes are removed from the car, the frot is given a bad look , the rear is changed , rust is fixed , fenders are pulled out etc.
![Image](http://img486.imageshack.us/img486/8328/img7008bg7.jpg)
By ViperZG
![Image](http://img139.imageshack.us/img139/6228/img7012aan9.jpg)
By ViperZG
and the new rear spacers, 3cm per side
![Image](http://img220.imageshack.us/img220/4239/img7018ane6.jpg)
By ViperZG
![Image](http://img139.imageshack.us/img139/6503/img7013adz3.jpg)
By ViperZG
the front bad look
![Image](http://img220.imageshack.us/img220/425/img7015atr2.jpg)
By ViperZG
![Image](http://img85.imageshack.us/img85/7339/img7024axw7.jpg)
By ViperZG
![Image](http://img139.imageshack.us/img139/2648/img7025abi6.jpg)
By ViperZG
![Image](http://img139.imageshack.us/img139/6980/img7026aul5.jpg)
By ViperZG
![Image](http://img139.imageshack.us/img139/293/img7027aan5.jpg)
By ViperZG
and finally ready for a little trip
![Image](http://img139.imageshack.us/img139/5968/img7028aqg9.jpg)
By ViperZG
![Image](http://img85.imageshack.us/img85/4111/img7030awp4.jpg)
By ViperZG
The car was then driven 100km like that
The custom front and rear bumper are being made at the moment , as well as the custom sideskirts and rear wing, I expect it to be finished and painted by the end of the week, so till the next report ...