daewoomofo's silver 2001 Lanos Sedan S+ (now lowered)

kinkyllama · Post by **kinkyllama** » Tue Oct 16, 2007 6:20 am

That looks low for just lowering springs... but thats def a good thing!

jidasas · Post by **jidasas** » Tue Oct 16, 2007 1:20 pm

The $50 bucks did include my filter...I didn't have time to wait on shipping cause I had a hole in the rubber hose after the factory air filter. I went to Oreilly Auto parts and got one of the $45 dollar honda kits and used it along with an old 60 and 90 degree angle pieces I already had.

Jimmy

Flat_Iron · Post by **Flat_Iron** » Tue Oct 16, 2007 7:43 pm

its looks better and better..now its a flatiron

daewoomofo · Post by **daewoomofo** » Tue Oct 16, 2007 11:48 pm

thanks for the kind words every one. i measured it today, the edge of the front bumper is 6.5" from the ground. would some one with a stock lanos please measure how far it is from their bumper to the ground. i cant measure my red lanos cause it has no engine.

daewoomofo · Post by **daewoomofo** » Wed Oct 17, 2007 11:56 pm

correction: its 5.5 inches from the center of the bumper where it folds under, to the ground.

Dillon · Post by **Dillon** » Thu Oct 18, 2007 2:13 am

i know this is a late post but your car is super clean and even thought theres no radical changes its a one of a kind.

daewoomofo · Post by **daewoomofo** » Thu Oct 18, 2007 9:42 pm

i made a new custom mesh grill. the old one was half assed, and i wasnt happy with it. i also painted the mesh "chrome" so it stays shiney

i also put my stereo system on a diet, its now just one 12" mtx thunder 5500, in a bandpass box on an alpine m301 amp. the speakers are powered buy the pioneer headunit

(notice that there are no visible wires)

its not nearly as loud, but it sounds soooooo much better

Spider · Post by **Spider** » Thu Oct 25, 2007 4:26 pm

Mofo,
You have done a really nice job on your ride..
Its classy dude !
Congrats. Your hard work and quality of it has definitely paid off.

mr_g · Post by **mr_g** » Fri Oct 26, 2007 6:19 am

I think that black mesh would be better. Maybe, paint the outside of headlamps in black also...

daewoomofo · Post by **daewoomofo** » Fri Oct 26, 2007 10:01 am

ive planned on painting the headlights black already, just havent had the time. id also like to do led running lights. black mesh just sort of blends in, you cant really see it, the silver hides the ugly latch that runs through the center of the grill, and it sort of fills in the grill

mr_g · Post by **mr_g** » Fri Oct 26, 2007 11:02 am

daewoomofo wrote:ive planned on painting the headlights black already, just havent had the time. id also like to do led running lights. black mesh just sort of blends in, you cant really see it, the silver hides the ugly latch that runs through the center of the grill, and it sort of fills in the grill

Yeah. It could pass on silver car, but on the black lanos, chrome details are ugly... I know it from my experience...

I use 9 white LEDs per headlight for drive light...

daewoomofo · Post by **daewoomofo** » Fri Oct 26, 2007 9:05 pm

im gonna keep the running lights in the stock position, i want to make a white led ring that will go around the stock bulb, ill cut the wire that goes to the stock running light and power the led's with it. then ill just keep the amber 1157 bulb for turn signals

WoOtYwOo · Post by **WoOtYwOo** » Thu Dec 20, 2007 12:09 am

i like the progress youve made

AborteK · Post by **AborteK** » Thu Jan 03, 2008 5:53 pm

Nice car, clean. Much like the KDM scene. It has you own unique touch. Very nice car!!! Congrats!

daewoomofo · Post by **daewoomofo** » Mon Apr 14, 2008 11:23 pm

nothing new, just finally got some better pics of my car all washed up and pretty