Nubira II Bodykits.. Anyone Know Where i Can Find Some?

92alex · Post by **92alex** » Thu Jun 28, 2007 4:33 pm

gse_turbo · Post by **gse_turbo** » Thu Jun 28, 2007 4:35 pm

start looking for a shop that can really good fiberglas or plastic-weld cause it will be custom. sorry

the costs from a kit over seas would level your wallet just in shipping something that big.

cheers,
garrett

92alex · Post by **92alex** » Thu Jun 28, 2007 4:37 pm

darn -_- .... i was hoping somone would have a bodykit... if they made them custom would it have to be my design or do they make there own?

gse_turbo · Post by **gse_turbo** » Thu Jun 28, 2007 4:58 pm

there are two ways of doing it and they both take telent.

the first is trying to find an ABS plactic kit from anothyer car like neon or something with similar shape and have it sectioned in and plastic-welded to the factory mounts and outer edges of the factory bumper.

the other is a bit the same. you will wave to find a fiberglass kit that you like, have it mocked into place and then have a mold or an 'overlay' made from the factory pieceso that all the body lines work and it looks like a manufactured kit.

if you forgo the 'full kit' idea you can buy a fiberglass lip kit from another car and bolt that to the car but DO NOT MOLD IT IN!

••• the one thing to keep in mind is that you should never mix different materials (i.e. ABS plastic and fiberglass) they have different properties and the kit will not last. •••

garrett

92alex · Post by **92alex** » Thu Jun 28, 2007 5:11 pm

lol never mind i wont even mess with a body kit ill just lower it so it will look bad lol

gse_turbo · Post by **gse_turbo** » Thu Jun 28, 2007 5:33 pm

not a bad choice!

garrett