Body Kits, Rims, Suspension, Wings, Lighting etc and exterior detailing.
Moderators: daewoomofo , Moderators Group
woodae
Super
Posts: 243 Joined: Tue Sep 13, 2005 4:30 pm
Location: Canada NS
Post
by woodae » Fri Jun 15, 2007 11:37 pm
if i allready have shocks and springs Eibach+kyb will a strut bar make any difference and how much of a diff????
=
2000 lanos 1.5l SOHC
eibach springs
Custom Circa interior
daewoomofo
Moderator
Posts: 4795 Joined: Fri Nov 18, 2005 1:41 am
Location: 313
Post
by daewoomofo » Sat Jun 16, 2007 12:14 am
yes, its a very good mod to do, if you can you should also make a rear one. a board member on here was supposed to make one for me (i paid and all) but its been over a year and still i have no rear strut bar.
Help keep Daewootech spam free, reply "Killspam" (no spaces) to spam posts
yeah i cant type, so what big freaking deal!
mezomaster
Expert
Posts: 354 Joined: Thu Jul 13, 2006 6:51 pm
Location: Egypt-Giza
Contact:
Post
by mezomaster » Sat Jun 16, 2007 3:05 am
how much would the front and rear strut affect on stability and handling when u have a semi hard shocks and springs??
woodae
Super
Posts: 243 Joined: Tue Sep 13, 2005 4:30 pm
Location: Canada NS
Post
by woodae » Sun Jun 17, 2007 12:11 am
Thats what i was wondering. is it worth it????
2000 lanos 1.5l SOHC
eibach springs
Custom Circa interior
daewoomofo
Moderator
Posts: 4795 Joined: Fri Nov 18, 2005 1:41 am
Location: 313
Post
by daewoomofo » Sun Jun 17, 2007 2:03 am
yes it is.
Help keep Daewootech spam free, reply "Killspam" (no spaces) to spam posts
yeah i cant type, so what big freaking deal!
ubuyau
Expert
Posts: 686 Joined: Fri Nov 01, 2002 10:16 am
Location: Australia
Contact:
Post
by ubuyau » Sun Jun 17, 2007 2:18 am
woodae wrote: Thats what i was wondering. is it worth it????
A front one is totally worth it!
I found it just holds the chassis tighter thru corners (so the car doesnt lunge as much from side to side thru roundabouts etc - it holds flatter, is more predictable and precise) and it does eliminate some wheel hop.
If you have stiffer shocks n lower springs its just going to get even better
--Tim
MMamdouh
Moderator
Posts: 7299 Joined: Wed Feb 18, 2004 8:33 am
Location: Cairo, Egypt
Contact:
Post
by MMamdouh » Sun Jun 17, 2007 8:21 am
mezomaster wrote: how much would the front and rear strut affect on stability and handling when u have a semi hard shocks and springs??
we had a front strut bar in the 2.0 nubira... i didn't drive it but Mostafa - the car owner - said it is a "must have" item
MMamdouh
daewoomofo
Moderator
Posts: 4795 Joined: Fri Nov 18, 2005 1:41 am
Location: 313
Post
by daewoomofo » Sun Jun 17, 2007 3:11 pm
a strut bar and lowering your car will make a WORLD of difference.
Help keep Daewootech spam free, reply "Killspam" (no spaces) to spam posts
yeah i cant type, so what big freaking deal!
mezomaster
Expert
Posts: 354 Joined: Thu Jul 13, 2006 6:51 pm
Location: Egypt-Giza
Contact:
Post
by mezomaster » Sun Jun 17, 2007 4:11 pm
WOW, i will put that on my next plans then
missp
Posts: 1 Joined: Mon Jun 18, 2007 5:02 am
Location: Perth Australia
Post
by missp » Mon Jun 18, 2007 5:07 am
So where do I find a front strut brace in Oz? Preferably Perth for an 02 Nubira?
new to Daewoos and she corners like a sail in the wind
gse_turbo
DTM Daewoo Mod
Posts: 2394 Joined: Fri Jun 23, 2006 4:20 am
Location: Englewood, Colorado United States
Contact:
Post
by gse_turbo » Tue Jun 19, 2007 4:52 pm
in Australia, look to the Cielo/Nexia they should be the same but take a measurement accross first.
garrett
mocpac
Moderator
Posts: 3385 Joined: Sat Jun 14, 2003 9:24 pm
Location: Puerto Rico
Contact:
Post
by mocpac » Tue Jun 19, 2007 11:00 pm
gse_turbo wrote: in Australia, look to the Cielo/Nexia they should be the same but take a measurement accross first.
garrett
Maybe for Lanos, The chasis of the nubira is wider.
And yes is a must!
gse_turbo
DTM Daewoo Mod
Posts: 2394 Joined: Fri Jun 23, 2006 4:20 am
Location: Englewood, Colorado United States
Contact:
Post
by gse_turbo » Tue Jun 19, 2007 11:34 pm
the bolt pttern from the nubi and the lanos are different. the lanos is several cm bidder.
garrett
woodae
Super
Posts: 243 Joined: Tue Sep 13, 2005 4:30 pm
Location: Canada NS
Post
by woodae » Wed Jun 20, 2007 2:53 pm
I custom made a strut bar for my car and my car is lowered the stiffness i gain is awesome.
2000 lanos 1.5l SOHC
eibach springs
Custom Circa interior