disc converssion

daewooluvr · Post by **daewooluvr** » Mon Jan 22, 2007 3:18 am

gse_turbo wrote:i got the waterjet back up and running so i thought that i'd put out a disc conversion for the lanos and other t-body cars with GSI or lanos rear beam.
what you get from me is a caliper mount in .5" (50.8mm) mild steel.
to that you have to add calipers assembly, wheel bearings and rotors from a '93 saturn, or other like models

the drums on the lanos are a .5" narrower then the rotor setup without the rotor mountso no spacers or track width adjustment is needed and you get to keep your 4x100 bolt pattern.

the bracket set is $60 and the rotor assembly is up to whatever you want to spend.

i'll post pics here soon of both the bracket and the step by step conversion.

Garrett

How are we coming with this item?

gse_turbo · Post by **gse_turbo** » Thu Jan 25, 2007 4:12 am

http://www.daewootech.com/forum/viewtopic.php?t=7572
here's the link to the page with picks and more info.

garrett

Audacity Racing · Post by **Audacity Racing** » Sun Jan 28, 2007 7:17 am

I'm ready to do this whenever...

gse_turbo · Post by **gse_turbo** » Tue Jan 30, 2007 3:18 am

if youd like we can go through paypal my account is lemanstuning@yahoo.com, i could also send you an invoice prior. did you want one set of brakets or three? if you wanted all three i might be able to send them for about $160 total, which would be like $20 off and free shipping.

let me know what you'd be interested in.
garrett

daewooluvr · Post by **daewooluvr** » Tue Jan 30, 2007 1:17 pm

Audacity Racing wrote:I'm ready to do this whenever...

1999 Daewoo Lanos Sedan
2001 Daewoo Lanos Hatch
2001 Daewoo Lanos Hatch
2006 Audi A3 Quattro

geez got enuf Lanos' haha

gse_turbo wrote:if youd like we can go through paypal my account is lemanstuning@yahoo.com, i could also send you an invoice prior. did you want one set of brakets or three? if you wanted all three i might be able to send them for about $160 total, which would be like $20 off and free shipping.

let me know what you'd be interested in.
garrett

I will want to order a set when I get my next pay. I'll paypal the address above.

gse_turbo · Post by **gse_turbo** » Thu Feb 01, 2007 2:41 am

sounds good.

garrett

Audacity Racing · Post by **Audacity Racing** » Thu Feb 01, 2007 6:34 am

gse_turbo wrote:if youd like we can go through paypal my account is lemanstuning@yahoo.com, i could also send you an invoice prior. did you want one set of brakets or three? if you wanted all three i might be able to send them for about $160 total, which would be like $20 off and free shipping.

let me know what you'd be interested in.
garrett

Ready when you are

audacityracing@juno.com is my paypal...

gse_turbo · Post by **gse_turbo** » Sat Feb 24, 2007 6:12 am

still interested?

garrett

gse_turbo · Post by **gse_turbo** » Tue Jun 05, 2007 10:38 pm

still offering this kit.

garrett

daewooluvr · Post by **daewooluvr** » Wed Jun 06, 2007 12:21 pm

gse_turbo wrote:still offering this kit.

garrett

Any chance you can fab up that handbrake cable bracket so we don't have to pick up a cable just for this bracket?

gse_turbo · Post by **gse_turbo** » Wed Jun 06, 2007 4:59 pm

it's not so much the bracket as it's the way the cable locks into the caliper and that can't be changed.

if you're interested in the conversion and can't get a new cable then i can get you a used set from the scrap yard for pretty cheap, same for the calipers, rotors, dust sheild...

garrett

whiteraven · Post by **whiteraven** » Mon Jun 11, 2007 11:12 pm

You think that you could make a post showing the parts needed for the Aveo to Forenza rear swap? I would really like to get rear discs in my Aveo, but am not sure on what parts I will need.

gse_turbo · Post by **gse_turbo** » Tue Jun 12, 2007 5:21 pm

i'll see what i can do. i haven't done this conversion yet but a friend of mine runs the zuki parts department so i can work something up. in the mean time you could proby pull your car onto your local dealer lot after hours and compair the the two spindle & brake mount.

garrett

The original daewootech forum

disc converssion

Re: disc converssion