2001 lanos replacing head...looking for torque specs

71cuda2 · Post by **71cuda2** » Mon Apr 30, 2007 6:22 pm

Hi,

I have purchased, what looks like the same service manual
you have in the general area, which does not look like any
service manual I presently own, it looks like a parts manual to me...

where do I find the torque settings for the head bolts,
cam shaft bolts, and cam sprockets, (need to replace the cam seals)

thanks

I would like to get a real service manual, any thoughts???

thanks
ken

ps
this is my sons car...
rebuilding my 4.7l durango
was easier than this, and more
room to work with

Daniel · Post by **Daniel** » Mon Apr 30, 2007 6:46 pm

Hi,

Depends of engine you have on the Lanos.

Daniel

71cuda2 · Post by **71cuda2** » Tue May 01, 2007 12:14 am

Yes, I suppose it does...
1.6l dual overhead cams

thanks
Ken

Spider · Post by **Spider** » Tue May 01, 2007 3:31 am

Hey Ken,

A Daewoo Lanos Factory Service Manual is what you need. It's a huge (2 volume) set. Covers everything.

I got mine new off E-bay for under $50.00 (USD)
A dealer will charge a lot more.
Here is a link that sells service manuals. Don't know if they have Daewoos now but you should be able to find one on E-bay someplace.

http://www.stores.ebay.com/BooksForCars

p.s. 1999, 2000 and 2001 1.6 DOHC engines are all the same, I think some other years as well but I don't know which ones.

Post by **PrecisionBoost** » Tue May 01, 2007 11:12 pm

http://www.daewootech.com/forum/album_p ... ic_id=1486

http://www.daewootech.com/forum/album_p ... ic_id=1485

I think the specs have been posted a couple of times allready..... not sure where they are.... I will look around

Daniel · Post by **Daniel** » Wed May 02, 2007 6:53 am

71cuda2 wrote:Yes, I suppose it does...
1.6l dual overhead cams

thanks
Ken

Here http://www.daewootech.com/forum/viewtopic.php?t=8753 . Post#7.
And here too http://www.daewootech.com/forum/viewtopic.php?t=5085 .
Daniel