Installing Jetspeed front bar and Evo Sideskirts.

chris2511 · Post by **chris2511** » Tue Mar 06, 2007 8:58 am

Well, i think the time has come to put my kit on, how exactly do i get it all on? I'm pretty sure I will be ok with the front bar, since im just basically replacing the old one, but with the sides, don't you need rails or something? Any help would be great!

Thanks.

lanos2001 · Post by **lanos2001** » Tue Mar 06, 2007 1:10 pm

the way i put on my evo skirts was with rivets. there will be three indention on the bottom of it to show where you need to drill a small hole for a rivet to be place there or you can probably just use screws too. then i put two rivets, or screw if you want, on both sides in the wheel wells. mine were a tight fit so i had to kinda pry the skirts on to a point. pretty straight forward.

nick

john_trickle · Post by **john_trickle** » Tue Mar 06, 2007 8:53 pm

Try Yellowpages, they have some good listings there.

john

lanos2001 · Post by **lanos2001** » Tue Mar 06, 2007 8:58 pm

yellow pages for what?

nick

john_trickle · Post by **john_trickle** » Tue Mar 06, 2007 9:04 pm

lanos2001 wrote:yellow pages for what?

nick

yellow pages for a pro to do it,

lanos2001 · Post by **lanos2001** » Tue Mar 06, 2007 9:12 pm

oh. well sideskirts are too easy to pay someone in my opinion. especially the evo ones since they marked where to drill or screw. its just fitting it up and screwing or riveting.

nick

john_trickle · Post by **john_trickle** » Tue Mar 06, 2007 9:17 pm

john_trickle wrote:
lanos2001 wrote:yellow pages for what?

nick
yellow pages for a pro to do it,

I know man i asked a question on painting and he put the same answer so i did the same.
john

lanos2001 · Post by **lanos2001** » Tue Mar 06, 2007 9:19 pm

lol

nick

chris2511 · Post by **chris2511** » Wed Mar 07, 2007 8:01 am

john_trickle wrote:
john_trickle wrote:
lanos2001 wrote:yellow pages for what?

nick
yellow pages for a pro to do it,
I know man i asked a question on painting and he put the same answer so i did the same.
john

Okkkkk, well spray painting is just a bit harder than installing a kit John, lol, specially if you want your whole car done properly, but anyway, I got the front bar off, and put the new one on, fitted great, it's Woo247's old one, the nice jetspeed one.

Tomorrow, via Nicks advice, (thanks btw

) I will try to put the side skirts on, should look good.

ubuyau · Post by **ubuyau** » Wed Mar 07, 2007 8:41 am

The side skirts should have fibreglass strips/rails that the side skirt sit on.

--Tim

chris2511 · Post by **chris2511** » Wed Mar 07, 2007 10:03 am

So without the rails, can you still put them on?

ubuyau · Post by **ubuyau** » Wed Mar 07, 2007 10:10 am

Anything is possible!

You'll just need a new way to secure it to the side of the car...

Liquid nails?

--Tim

lanos2001 · Post by **lanos2001** » Wed Mar 07, 2007 2:37 pm

mine didn't come with any rails or strips.

nick

The original daewootech forum

Installing Jetspeed front bar and Evo Sideskirts.

Installing Jetspeed front bar and Evo Sideskirts.

Get a pro to do it