N/A tech, Cold Air Intakes, Spark Plugs/wires, Cat backs, Exhaust...etc
Moderators: daewoomofo , Moderators Group
Dillon
Expert
Posts: 573 Joined: Fri Dec 16, 2005 2:58 pm
Location: Lenoir, NC
Contact:
Post
by Dillon » Sat Mar 03, 2007 5:47 pm
What Are these two brackets for on my engine?
Also can i get a fule pressure gauge for my car like this one?
Thanks
KDM 2.0 Nubira
Audacity Racing
moron
Posts: 4493 Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Post
by Audacity Racing » Sat Mar 03, 2007 6:38 pm
The brackets are lift points. It's where you attach your cherry picker or crane to pull the engine out if you go through the hood.
The last one if a fuel pressure regulator.
jorge
Expert
Posts: 1819 Joined: Wed Apr 27, 2005 2:25 am
Location: Corozal
Contact:
Post
by jorge » Sat Mar 03, 2007 9:19 pm
+1
Con mas mec.s que un taller jajajajaja Mec. Diaz, Mec. Cheo Racing, Mec. eljunito, y ed flash tunning simplemente los mejores!
Dillon
Expert
Posts: 573 Joined: Fri Dec 16, 2005 2:58 pm
Location: Lenoir, NC
Contact:
Post
by Dillon » Sun Mar 04, 2007 3:54 am
How hard is it to install a fuel pressure regulator?
Im interested in buying one but am curious if i can install it myself.
If anyone has any tips or steps it would be great!
Thanks
KDM 2.0 Nubira
Nubira2.2
Expert
Posts: 1325 Joined: Wed Nov 10, 2004 10:47 pm
Location: SouthWest, PR
Post
by Nubira2.2 » Sun Mar 04, 2007 5:45 am
u can se there where i instaled the pressure gauge
the FPR goes in the return line
it will have two fittings one that is connected to the fuel rail the other to the tank
Mitsubishi Eclipse GST 304whp 319tq @22psi w EVO 3 16G Daily Driven
DAEWOO Nubira 2.2L Turbo 217whp 204tq @13psi SOLD
Dillon
Expert
Posts: 573 Joined: Fri Dec 16, 2005 2:58 pm
Location: Lenoir, NC
Contact:
Post
by Dillon » Sun Mar 04, 2007 6:19 am
So other than the Fuel Pressure Reguator what other parts will i need if any?
KDM 2.0 Nubira