Nubira cooling - info needed urgently

N/A tech, Cold Air Intakes, Spark Plugs/wires, Cat backs, Exhaust...etc

Moderators: daewoomofo, Moderators Group

Locked
User avatar
GsiTurbo
Super Moderator
Posts: 1791
Joined: Thu Mar 13, 2003 10:56 pm
Location: Edmonton, Alberta, Canada
Contact:

Nubira cooling - info needed urgently

Post by GsiTurbo »

Hi all,

I wanted to connect all cooling lines and such in the car today. I made diagram of Optra's system, but upon comparison there is difference between the two. Optra only has two rear plastic coolant line outputs, while Nubi's motor has three.

I need to know where do the circled connectors connect.
Image

One of them should go to the other heater core line, and one to the overflow.. but the other???

Tom
Image
__________________________
2002 Lanos 1.5 SOHC... stock!!!
User avatar
PrecisionBoost
Super Moderator
Posts: 4437
Joined: Thu Jun 19, 2003 5:59 am
Location: Edmonton, Alberta, Canada

Post by PrecisionBoost »

Hi Tom..... I sent you the diagrams from my Daewoo EPC.... they show the routing pretty good.

#4 goes to the overflow tank
#3 goes to the heater core
#2 goes to the hose bypass which seems to tee into the line going back to the water pump

Good luck.
2010 BMW 335D
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
User avatar
GsiTurbo
Super Moderator
Posts: 1791
Joined: Thu Mar 13, 2003 10:56 pm
Location: Edmonton, Alberta, Canada
Contact:

Post by GsiTurbo »

Got it, thanks Chris!
Image
__________________________
2002 Lanos 1.5 SOHC... stock!!!
Locked