door trims problem!

the_house123 · Post by **the_house123** » Tue Feb 13, 2007 4:36 pm

hi guys, this is a very odd problem i have.
iv taken off my door trims a couple of times for new speakers etc, however after taking the left door trim off yesterday to put in some tweeters, i now canot seam to get the trim back on the door.

As in it feels as there is something in the way at the top. (where the trim slots into the door)

Does anyone have any suggestions of a way of inserting it properly or at least an idea why this happened?
cheers
mike

MMamdouh · Post by **MMamdouh** » Tue Feb 13, 2007 9:25 pm

i don't know if i am going to be clear enough but here it goes.

see if the upper part of the trim that goes across the door's glass is twisted or so from the inside, if it is twisted it will prevent the trim from going downwords and locking into place. maybe one of the "pins" attaching this trim to the rest of the door trim got twisted outwards and preventing the lockup.

MMamdouh

daewoomofo · Post by **daewoomofo** » Tue Feb 13, 2007 11:17 pm

roll the windows down and try it again, that always worked for me

the_house123 · Post by **the_house123** » Wed Feb 14, 2007 11:22 am

thanks guys, will try both thoes and post up the results.
should work as on my other door trim, i was completely fine, no problems what soever.
cheers lads
mike

the_house123 · Post by **the_house123** » Wed Feb 14, 2007 1:01 pm

awesome, i found that one of the "pins" were busted, making the trim unable to pop back in.
so to solve tat, i removed it, used the window method and now its all sorted
cheers guys
mike