GsiTurbo 2.0L 16V Turbo buildup ***DYNORUN 236WHP 255WTQ***

Here you can find images and specs of our member's car. Please use the gallery to upload your pictures.

Moderators: daewoomofo, Moderators Group

Locked
User avatar
GsiTurbo
Super Moderator
Posts: 1791
Joined: Thu Mar 13, 2003 10:56 pm
Location: Edmonton, Alberta, Canada
Contact:
Contact GsiTurbo

GsiTurbo 2.0L 16V Turbo buildup ***DYNORUN 236WHP 255WTQ***

Post by GsiTurbo »

As some of you already know, I was gathering bits and pieces over the last little while for my hybrid T20SED, C20LET, X20XEV buildup. I think I will simply call this hybrid T20LEH, following the official GM naming convention.

At this point, desired power output will be in the neighbourhood of 400 crank HP, or so.

Specifications:

Block
- T20SED block, 86.50mm oversize
- Wiseco ceramic coated forged pistons 8.8:1, with 0.065' headgasket
- Toga steel rods
- ARP main studs
- ARP ProWave 2000 conrod bolts
- ARP flywheel bolts
- Lemans 2.0 flywheel/clutch

Wiseco pistons, before ceramic coating
Image

Toga steel rods
Image

Block
Image

Underside
Image

Steel rods close-up
Image

Custom main studs spacers
Image

Flywheel with ARP bolts close-up
Image

Cylinder Head
T20SED cylinder head
- full port, polish and blueprint
- new valves and guides
- uprated dual valve springs from QED
- adjustable cam gears from QED

Image

Image

Image

I particularly enjoy these... :)
Image

Image

Image

The power adder...
Image

TO BE CNOTINUED....
Last edited by GsiTurbo on Fri Oct 26, 2007 4:41 am, edited 10 times in total.
Image
__________________________
2002 Lanos 1.5 SOHC... stock!!!
Top
daewoomofo
Moderator
Posts: 4795
Joined: Fri Nov 18, 2005 1:41 am
Location: 313

Post by daewoomofo »

ok so thats the engine for my lanos sedan right? im very jealouse
Image

Help keep Daewootech spam free, reply "Killspam" (no spaces) to spam posts

yeah i cant type, so what big freaking deal!
Top
gse_turbo
DTM Daewoo Mod
Posts: 2394
Joined: Fri Jun 23, 2006 4:20 am
Location: Englewood, Colorado United States
Contact:
Contact gse_turbo

Post by gse_turbo »

what are you doing for a header? are you planing to keep your ERG system? if not do you want a ported, EGR free, MLS or MLC header gasket? it is made to machthe large port 1/2" stainless header flangethat i sell. chris is getting a couple sets this week, if your interestedask chris what he thinks when he gets his.

hope you have fun,
Garrett
Image
Top
User avatar
GsiTurbo
Super Moderator
Posts: 1791
Joined: Thu Mar 13, 2003 10:56 pm
Location: Edmonton, Alberta, Canada
Contact:
Contact GsiTurbo

Post by GsiTurbo »

The header is ordered and paid for, hand build competition manifold. But thanks for the offer and I will keep in mind in case something changes. The manifold I am getting does not have the EGT port, and a blanking plate will be used to eliminate the EGR.
Image
__________________________
2002 Lanos 1.5 SOHC... stock!!!
Top
MMamdouh
Moderator
Posts: 7299
Joined: Wed Feb 18, 2004 8:33 am
Location: Cairo, Egypt
Contact:
Contact MMamdouh

Post by MMamdouh »

seems like a very good project man... keep up the good work.

MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Image
Top
ubuyau
Expert
Posts: 686
Joined: Fri Nov 01, 2002 10:16 am
Location: Australia
Contact:
Contact ubuyau

Post by ubuyau »

MMamdouh wrote:seems like a very good project man... keep up the good work.

MMamdouh
+1. Well done.

I am so jealous! I have been waiting what seems an eternity for my custom forged pistons... :cry:

--Tim
Top
Nubira2.2
Expert
Posts: 1325
Joined: Wed Nov 10, 2004 10:47 pm
Location: SouthWest, PR

Post by Nubira2.2 »

everything looks perfect

what turbo is that one ?

looks like a T4, specs ?
Image
Mitsubishi Eclipse GST 304whp 319tq @22psi w EVO 3 16G Daily Driven
DAEWOO Nubira 2.2L Turbo 217whp 204tq @13psi SOLD
Top
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:
Contact Efratech

Post by Efratech »

t4? looks like a t3
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
Top
rage_rman
Posts: 46
Joined: Wed Feb 09, 2005 11:03 pm
Location: Edmonton Alberta, Canada

Post by rage_rman »

It's ok... Doesn't look this good in real life. J/K This thing is going to be SAVAGE!!!!! Oh and his Turbo is a T3/T4 WET FLOATING BALLBEARING Turbo. This image doesn't do it justice.
Image
2005 Nissan Sentra SE-R Spec V Turbo
Top
exist3nce
Expert
Posts: 1233
Joined: Mon Oct 25, 2004 2:24 am
Location: Toronto, Canada

Post by exist3nce »

Can't wait to see (and hear) when its all together!! Also interested in what actual dyno and track numbers this will put down.
Top
User avatar
decyphex
Junior
Posts: 113
Joined: Sun Oct 01, 2006 4:07 am
Location: Middletown, DE, US
Contact:
Contact decyphex

Post by decyphex »

IM DROOLING!! (this requires CAPS!)
Image
Top
Stefan
Super
Posts: 264
Joined: Thu Feb 12, 2004 7:31 pm
Location: Essex, England

Post by Stefan »

Looking good Tom!
Is the manifold going to be a proper pulse one to go with the twin scroll turbine housing?
Why did you need spacers on the main cap studs?

Can't wait to see it fully built :)


Stef
Vauxhall Astra.
T3 60trim, Intercooler, Mopar Super 60 Injectors, SDS Stand Alone EFI, Cast T3 Manifold With External Wastegate + More...
Top
gse_turbo
DTM Daewoo Mod
Posts: 2394
Joined: Fri Jun 23, 2006 4:20 am
Location: Englewood, Colorado United States
Contact:
Contact gse_turbo

Post by gse_turbo »

what are the pistins from? the d-tecs only have valve releifs for the intake.
Garrett
Image
Top
User avatar
GsiTurbo
Super Moderator
Posts: 1791
Joined: Thu Mar 13, 2003 10:56 pm
Location: Edmonton, Alberta, Canada
Contact:
Contact GsiTurbo

Post by GsiTurbo »

Nubira2.2 => Turbo specs: " O Trim " T3/T04E hybrid .70 A/R TURBINE HOUSING; 0 trim is often also referred to as 57 trim. It also features Turbonetics center ball bearing cartridge.
Image

Stefan => The manifold is being made by our friend from way south. It was referred to as 'competition manifold', and I it will be proper pulse manifold. The main cap spacers are required as GM changed caps design between XE and XEV/LET

Left - XEV/alu pan style. Right - XE metal pan
Image

gse_turbo => Pistons are from LET
Image
__________________________
2002 Lanos 1.5 SOHC... stock!!!
Top
Nubira2.2
Expert
Posts: 1325
Joined: Wed Nov 10, 2004 10:47 pm
Location: SouthWest, PR

Post by Nubira2.2 »

ufff that turbo is good for 30psi :P

the build up is solid
Image
Mitsubishi Eclipse GST 304whp 319tq @22psi w EVO 3 16G Daily Driven
DAEWOO Nubira 2.2L Turbo 217whp 204tq @13psi SOLD
Top
Locked

Return to “Member's Cars and specs”