intake manifold v2.0 :)

Post by **Efratech** » Tue Aug 08, 2006 3:42 am

Well this is how it looks right now:

MMamdouh · Post by **MMamdouh** » Tue Aug 08, 2006 9:54 am

looks very nice man.

MMamdouh

Post by **PrecisionBoost** » Wed Aug 09, 2006 1:31 am

what are those two tubes on the outside runners for??????

Post by **Efratech** » Wed Aug 09, 2006 1:46 am

to hold the fuel rail

MMamdouh · Post by **MMamdouh** » Wed Aug 09, 2006 10:16 am

was going to ask the same question but got it figured out

MMamdouh

lanowoo · Post by **lanowoo** » Wed Aug 09, 2006 3:23 pm

NIce :P

Post by **Efratech** » Thu Aug 17, 2006 2:21 am

update...

i did pick up the manifold yesterday from the welder and left it at shop. it looks pretty nice. today is a holyday here, so no work. tomorrow may be the first start of the car with the new manifold. i forgot to take pics with my phone camera. tomorrow will get some.

Post by **Efratech** » Thu Aug 17, 2006 11:20 pm

Its finally welded!!!!!! my tuner did use the dremel to soft a bit inside the base of the injectors for a perfect fit, also did it inside the runners for a nice injector clearance

now the flange only needs to be skimed a bit.

my cars back

MMamdouh · Post by **MMamdouh** » Fri Aug 18, 2006 11:32 am

looks very very nice man!

one question: if you put on a different flange, will this intake fit a 1.5 SOHC?? will it add more power to it?

MMamdouh

Post by **Efratech** » Fri Aug 18, 2006 2:33 pm

its not just the flange, remember that each head has a different distance between the ports

mister_g · Post by **mister_g** » Fri Aug 18, 2006 5:12 pm

Nice. This looks like lexmaul...

Why didn't you go on ITB system instead of RAM induction system?

Post by **Efratech** » Fri Aug 18, 2006 7:05 pm

yeah, the lexmaul has longer runners.

ITBs???

my budged doesnt allow it

kinkyllama · Post by **kinkyllama** » Fri Aug 18, 2006 7:20 pm

So whats the stock intake mani look like? and how exactly is this better. Better design? just smoother? Longer runners?

Looks nice. I was thinking of doing some little port matching on mine but wanna know how this ones better than your stock one.

Post by **Efratech** » Fri Aug 18, 2006 9:23 pm

better plenum, better straight runners, improves flow.

Very very similar to your stock one.

Nubira2.2 · Post by **Nubira2.2** » Fri Aug 18, 2006 9:37 pm

that manifold will give good top end power in his C20XE

whats next to do Efra ?