exterior parts im getting!
Moderators: daewoomofo, Moderators Group
exterior parts im getting!
im getting front (with a lip) and back bumpers, sideskirts, mirrors, and other bits.
the stuff is already flying and it should be here by the weekend!
a big thank you to Steve Heley from astra-mk2.com for the help on getting the parts!
This is Steve's car when it was green, now red (yes its not white, as you can see in the front bumper above)
Tom, Chris, watch out... im after you guys!!!
the stuff is already flying and it should be here by the weekend!
a big thank you to Steve Heley from astra-mk2.com for the help on getting the parts!
This is Steve's car when it was green, now red (yes its not white, as you can see in the front bumper above)
Tom, Chris, watch out... im after you guys!!!
Last edited by Efratech on Tue Jul 11, 2006 6:14 pm, edited 1 time in total.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
146.6WHP/135lb.ft - 14.81@94mph
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
-
- Posts: 3
- Joined: Fri Jul 14, 2006 7:59 am
- Contact:
at tom, yeh you're the first no doubt.
Tom, the sideskirts and the rear bumper are not bolt on parts.
the lemans chasis doesnt have the holes. damn USDM version :P
that bumper base on the lemans is kinda heavy lol.
the bolt patter is a couple of inches different on the euro bumper.
Tom, the sideskirts and the rear bumper are not bolt on parts.
the lemans chasis doesnt have the holes. damn USDM version :P
that bumper base on the lemans is kinda heavy lol.
the bolt patter is a couple of inches different on the euro bumper.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
146.6WHP/135lb.ft - 14.81@94mph
- GsiTurbo
- Super Moderator
- Posts: 1791
- Joined: Thu Mar 13, 2003 10:56 pm
- Location: Edmonton, Alberta, Canada
- Contact:
Yes Efrain. You need to drill new holes for the bumpers. Sideskirts-wise, get some 3M double sides automotive trim tape - will hold good and forever and ever, and ever, and ever....or even longer
And think of all the weight you are saving with the removal of the heavy oem bumper supports
And think of all the weight you are saving with the removal of the heavy oem bumper supports
__________________________
2002 Lanos 1.5 SOHC... stock!!!
i like all of yall's parts and bumpers, iwanna get the sport one for my lanos, and the bumper youhave now Efrain, will take a lot of weight off of the front end, like gsi said..
WOOOOO HOOOOO for a DAEWOO!!
-SRI -RE:APC STAINLESS STEEL PERFORMANCE FILTER
-VALVE COVER VENT FILTER
-CUSTOM ROD CRYSTAL DRIVING LIGHTS
-1200W AMP WITH 12" SUB -KICKS WOO BUTT!!!!!
-SRI -RE:APC STAINLESS STEEL PERFORMANCE FILTER
-VALVE COVER VENT FILTER
-CUSTOM ROD CRYSTAL DRIVING LIGHTS
-1200W AMP WITH 12" SUB -KICKS WOO BUTT!!!!!