Body Kits, Rims, Suspension, Wings, Lighting etc and exterior detailing.
Moderators: daewoomofo , Moderators Group
daewhorider
Junior
Posts: 108 Joined: Tue Jun 13, 2006 4:38 am
Post
by daewhorider » Fri Jun 16, 2006 10:12 pm
Hey the tail light in my 199 lanos hatchback is out, its from the sub vibrations i think and i just need to connect the wire to it a little better cuz when i slap it it comes on then when i turn sub up it goes out. Help Appreciated.
daewoomofo
Moderator
Posts: 4795 Joined: Fri Nov 18, 2005 1:41 am
Location: 313
Post
by daewoomofo » Fri Jun 16, 2006 10:14 pm
sounds to me like a loose bulb
Help keep Daewootech spam free, reply "Killspam" (no spaces) to spam posts
yeah i cant type, so what big freaking deal!
daewhorider
Junior
Posts: 108 Joined: Tue Jun 13, 2006 4:38 am
Post
by daewhorider » Fri Jun 16, 2006 10:19 pm
Yea its a vary minor problem its just that i unscrew the bolts but then i try to pull the light off but it feels like there are some clips or somthing that get in the way.
daewoomofo
Moderator
Posts: 4795 Joined: Fri Nov 18, 2005 1:41 am
Location: 313
Post
by daewoomofo » Fri Jun 16, 2006 10:23 pm
you prolly have to take it out at an angle (sort of slide it out)
Help keep Daewootech spam free, reply "Killspam" (no spaces) to spam posts
yeah i cant type, so what big freaking deal!
daewhorider
Junior
Posts: 108 Joined: Tue Jun 13, 2006 4:38 am
Post
by daewhorider » Fri Jun 16, 2006 10:23 pm
Should i just stick a screwdriver in there or somthing? Im afraid of scratching or breaking somthing though.
daewhorider
Junior
Posts: 108 Joined: Tue Jun 13, 2006 4:38 am
Post
by daewhorider » Fri Jun 16, 2006 10:44 pm
Alright Im going to go stick shit in there, bbl with the results.
lanos2001
Expert
Posts: 4245 Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma
Post
by lanos2001 » Fri Jun 16, 2006 11:22 pm
if you have a hatchback you unscrew the two bolts then slide it towrads the outside of the car. then it'll pop out.don't put a screwdriver in there.
nick
save a tree, eat a beaver.
daewhorider
Junior
Posts: 108 Joined: Tue Jun 13, 2006 4:38 am
Post
by daewhorider » Sat Jun 17, 2006 3:29 am
Lol thank you, i figured it out on my own. The sub i have wore away the metal on the bulb and i had to rotate it and put it back and now it works no problems.