N/A tech, Cold Air Intakes, Spark Plugs/wires, Cat backs, Exhaust...etc
Moderators: daewoomofo , Moderators Group
kroz123
Expert
Posts: 592 Joined: Sun May 30, 2004 3:47 pm
Location: Oranjestad, Aruba
Contact:
Post
by kroz123 » Wed May 10, 2006 7:49 pm
hey guys, I bought new plugs again (cold) and I'm a bit confused.
Does our cars need cold or hot plugs?
What would be better for a stock engine?
What the different between those too?
Plugs are NGK V-groove nr: 2756 BKR6E-11 (cold)
Arvin
Last edited by
kroz123 on Sun May 28, 2006 8:28 pm, edited 3 times in total.
T18SED Engine.
klonek78
Junior
Posts: 100 Joined: Tue Jan 24, 2006 9:46 pm
Post
by klonek78 » Wed May 10, 2006 9:11 pm
rr__kroz123 wrote: hey guys, I bought new plugs again (cold) and I'm a bit confused.
Does our cars need cold or hot plugs?
What would be better for a stock engine?
What the different between those too?
Plugs are NGK V-groove nr: 2756 BKR6E-11 (cold)
Arvin
For stock engine the best are stock plugs.....
MMamdouh
Moderator
Posts: 7299 Joined: Wed Feb 18, 2004 8:33 am
Location: Cairo, Egypt
Contact:
Post
by MMamdouh » Wed May 10, 2006 10:30 pm
according to NGK numbering code; the 6 in the spark plug part number refers to how hot/cold it is and for a stock lanos engine you should be getting a 6 spark plug so you are on the correct track.
for more info click "Manufacturer's Numbering System" at the left bottom on the following link:
http://www.ngk.com/sparkplug411.asp
MMamdouh
kroz123
Expert
Posts: 592 Joined: Sun May 30, 2004 3:47 pm
Location: Oranjestad, Aruba
Contact:
Post
by kroz123 » Thu May 11, 2006 12:21 am
thanx guys.
more input would be great.
T18SED Engine.
PrecisionBoost
Super Moderator
Posts: 4437 Joined: Thu Jun 19, 2003 5:59 am
Location: Edmonton, Alberta, Canada
Post
by PrecisionBoost » Sat May 13, 2006 8:03 am
You want to go to a colder plug when running nitrous or turbo..... otherwise.... stay with the stock plug heat range. (which is 6)
2010 BMW 335D
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
kroz123
Expert
Posts: 592 Joined: Sun May 30, 2004 3:47 pm
Location: Oranjestad, Aruba
Contact:
Post
by kroz123 » Sat May 13, 2006 11:43 am
ok thanx Chris
T18SED Engine.
JohnnyC
Expert
Posts: 1433 Joined: Tue Jan 31, 2006 4:48 am
Location: Kalamazoo, Michigan
Contact:
Post
by JohnnyC » Sat May 13, 2006 12:36 pm
Actually I'm using the same plugs you are RR_Kroz123. I've got NGK V-Groove (V-Power) BKR6E-11 plugs. I think they work great.
kroz123
Expert
Posts: 592 Joined: Sun May 30, 2004 3:47 pm
Location: Oranjestad, Aruba
Contact:
Post
by kroz123 » Sat May 13, 2006 6:23 pm
thanx for the info Johnny
T18SED Engine.
JohnnyC
Expert
Posts: 1433 Joined: Tue Jan 31, 2006 4:48 am
Location: Kalamazoo, Michigan
Contact:
Post
by JohnnyC » Sat May 13, 2006 6:50 pm
or maybe they do... since I'm still having some issues. hehe Aparently
kroz123
Expert
Posts: 592 Joined: Sun May 30, 2004 3:47 pm
Location: Oranjestad, Aruba
Contact:
Post
by kroz123 » Sun May 14, 2006 5:23 am
JohnnyC wrote: or maybe they do... since I'm still having some issues. hehe Aparently
what does your car do?
T18SED Engine.
JohnnyC
Expert
Posts: 1433 Joined: Tue Jan 31, 2006 4:48 am
Location: Kalamazoo, Michigan
Contact:
Post
by JohnnyC » Sun May 14, 2006 5:53 am
You'd have to look at my
blinking CEL at 70mph thread
I don't think it was the plugs though... it's something else
kroz123
Expert
Posts: 592 Joined: Sun May 30, 2004 3:47 pm
Location: Oranjestad, Aruba
Contact:
Post
by kroz123 » Thu May 25, 2006 1:06 am
My cars running like crap.
I never gap the plugs but with these I did gap them (.044) and the cars not running good, sometimes when I am at a stop light the cars tends to not pickup that fast and sometimes it sounds like a boom I think my cars misfiring or getting to much gas.
I have also used NGK V-groove nr: 2087 - BKR5EYA but I didn't gap them and the car did not do like the new ones I have now.
I'm thinking right now that I'll be better with the stock ones the dealer has. (Also NGK but 2 leads)
Pls help guys
T18SED Engine.
MMamdouh
Moderator
Posts: 7299 Joined: Wed Feb 18, 2004 8:33 am
Location: Cairo, Egypt
Contact:
Post
by MMamdouh » Thu May 25, 2006 6:36 am
yes you are better off with the NGK dual electrode plus the fact that the BKR5 EYA plug is colder than what is sepacified for your engine.
MMamdouh
kroz123
Expert
Posts: 592 Joined: Sun May 30, 2004 3:47 pm
Location: Oranjestad, Aruba
Contact:
Post
by kroz123 » Thu May 25, 2006 5:22 pm
MMamdouh wrote: yes you are better off with the NGK dual electrode plus the fact that the BKR5 EYA plug is colder than what is sepacified for your engine.
MMamdouh
so I can use the 5 too?
T18SED Engine.
lanowoo
Expert
Posts: 783 Joined: Tue Apr 11, 2006 7:10 pm
Location: U.S.A~ somewhere.
Post
by lanowoo » Thu May 25, 2006 7:28 pm
if it is backfiring, it could also be out of timming just enough to backfire, i had that happrn untill i had the timming advanced a little.
WOOOOO HOOOOO for a DAEWOO!!
-SRI -RE:APC STAINLESS STEEL PERFORMANCE FILTER
-VALVE COVER VENT FILTER
-CUSTOM ROD CRYSTAL DRIVING LIGHTS
-1200W AMP WITH 12" SUB -KICKS WOO BUTT!!!!!