the replacement of my racer...
Moderators: daewoomofo, Moderators Group
- PrecisionBoost
- Super Moderator
- Posts: 4437
- Joined: Thu Jun 19, 2003 5:59 am
- Location: Edmonton, Alberta, Canada
Good luck with your Lemans, I'm also looking for Eurospec bumpers (among other things )
I finished welding the new front end onto my Lemans and I am about 30% finished grinding and polishing the weld surfaces so that it's perfectly flat.
I figure another week and I should have it up on the dyno to get some stock horsepower numbers before I start modifying the engine.
I finished welding the new front end onto my Lemans and I am about 30% finished grinding and polishing the weld surfaces so that it's perfectly flat.
I figure another week and I should have it up on the dyno to get some stock horsepower numbers before I start modifying the engine.
2010 BMW 335D
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
Hi,
cheers for all the good comments.
all the parts have been swapped to the lemans (some small bits left)
towed the car yesterday to the performance mechanic.
Its now sitting there to get a new intake manifold made up.
since the intake will be appart ill bore the current throttle body to 64 mm (now is 60mm).
then will get mapped again, so ill love to see a few more horses.
btw the lemans is a bit lighter than the 4 door racer... you know what that means
cheers for all the good comments.
all the parts have been swapped to the lemans (some small bits left)
towed the car yesterday to the performance mechanic.
Its now sitting there to get a new intake manifold made up.
since the intake will be appart ill bore the current throttle body to 64 mm (now is 60mm).
then will get mapped again, so ill love to see a few more horses.
btw the lemans is a bit lighter than the 4 door racer... you know what that means
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
146.6WHP/135lb.ft - 14.81@94mph
this morning i went to pick up a second hand daewoo radiator fan...
well the one i got its pretty new.
then i went to my tuners place...
i was working on the car, took the old intake manifold off... and installed the new radiator fan.
next week he should be working on mine. (im next in line waiting for a 240sx turbo to be finished)
a friend took a couple of daytime pics of the lemans, i should be getting them soon.
Efrain.
well the one i got its pretty new.
then i went to my tuners place...
i was working on the car, took the old intake manifold off... and installed the new radiator fan.
next week he should be working on mine. (im next in line waiting for a 240sx turbo to be finished)
a friend took a couple of daytime pics of the lemans, i should be getting them soon.
Efrain.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
146.6WHP/135lb.ft - 14.81@94mph