the replacement of my racer...

General, Humor, Post here everything that doesn't belong in any of the other forums.

Moderators: daewoomofo, Moderators Group

User avatar
mocpac
Moderator
Posts: 3385
Joined: Sat Jun 14, 2003 9:24 pm
Location: Puerto Rico
Contact:

Post by mocpac »

Exito, Efrain, let see the new # in the race park....
ImageImage
Stefan
Super
Posts: 264
Joined: Thu Feb 12, 2004 7:31 pm
Location: Essex, England

Post by Stefan »

Wow :D Glad you've got a new car Efrain. With the GTE bodykit it'll be a good looking car 8)

Stef
Vauxhall Astra.
T3 60trim, Intercooler, Mopar Super 60 Injectors, SDS Stand Alone EFI, Cast T3 Manifold With External Wastegate + More...
User avatar
PrecisionBoost
Super Moderator
Posts: 4437
Joined: Thu Jun 19, 2003 5:59 am
Location: Edmonton, Alberta, Canada

Post by PrecisionBoost »

Good luck with your Lemans, I'm also looking for Eurospec bumpers (among other things )

I finished welding the new front end onto my Lemans and I am about 30% finished grinding and polishing the weld surfaces so that it's perfectly flat.

I figure another week and I should have it up on the dyno to get some stock horsepower numbers before I start modifying the engine.
2010 BMW 335D
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Post by Efratech »

Hi,

cheers for all the good comments.

all the parts have been swapped to the lemans (some small bits left)

towed the car yesterday to the performance mechanic.

Its now sitting there to get a new intake manifold made up.

since the intake will be appart ill bore the current throttle body to 64 mm (now is 60mm).

then will get mapped again, so ill love to see a few more horses.

btw the lemans is a bit lighter than the 4 door racer... you know what that means :)
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
JohnnyC
Expert
Posts: 1433
Joined: Tue Jan 31, 2006 4:48 am
Location: Kalamazoo, Michigan
Contact:

Post by JohnnyC »

VroooooooOOOoom!! :D
Image
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Post by Efratech »

this morning i went to pick up a second hand daewoo radiator fan...

well the one i got its pretty new.

then i went to my tuners place...

i was working on the car, took the old intake manifold off... and installed the new radiator fan.

next week he should be working on mine. (im next in line waiting for a 240sx turbo to be finished)

a friend took a couple of daytime pics of the lemans, i should be getting them soon.

Efrain.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:

Post by Efratech »

the pics i promised

Image

Image

Image

Image


:)
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
Joso
Super
Posts: 223
Joined: Sun Jan 22, 2006 9:34 pm
Location: Barcelona, Spain

Post by Joso »

I have always liked classic cars keeped in a good condition. The kadett is considered a classic here and yours look nice.
racer95
Junior
Posts: 179
Joined: Wed Feb 01, 2006 9:40 am
Location: Lebanon

Post by racer95 »

i still prefer the Racer look but its a good work
we want to see it in the racing
-1.6L ohc kadett engine
-14"rims and tires
-custom type of Racer
-Boschmann sound system




Standard Motor Company
Locked