Lanos 1.6DOHC turbo

chang · Post by **chang** » Thu May 13, 2004 5:03 pm

Hi, damian,
As I said before, those I said were based on N.A tuning, but some of them can be applied turbo system.
all the pics and detailed descriptions are in our Product instruction.

1. triple metallic headgasket (not thicker!)
; this is genuine parts and applied from Lacetti 1.6 DOHC engine
so you can apply to your 1.6 Lanos without any trouble.
we using for increasing compression ratio on the N.A engine.

The previous one has 1.45mm of thickness
but this metal gasket has 0.75mm, so you can get approx. 0.7mm of rsing effect on the compression ratio.
Sales price 16.60 USD

2. Intimidator highcam shaft for Daewoo 1.6 dohc
; It is Made by WEBCAM in U.S from our request.
Sales price 999.20 USD

3. Flywheel
; this is qenuine parts of 1.5 SOHC engine in Korea
and this can be equipped on 1.6 DOHC engine,
it is 2 kg lighter than 1.6 DOHC's (but you should change clutch set together)
Sales price 29.10 USD

4. performance pulleys - Intimidator Variable Cam sprocket
; High-cam improves performance in modification of duration or lift. Variable cam-sprocket can improve performance in setting of valve timing for genuine camshaft in two direction; advance & retard. Approx. 3~5 hp can go up.
Available for Daewoo 1.6, 1.8, 2.0, 2.2 dohc engine
Sales price 208.40 USD ( 1set for aspirator & exhaust)

5. lanos ECU could not be remapped
; it is possible, let me check with Mr. Lee, I will post up soon.

6. webcams
;it is sensitive probem, let me talk with Mr.Lee, I will post up soon.

Thanks

chang · Post by **chang** » Thu May 13, 2004 5:11 pm

Wolf-Spirit · Post by **Wolf-Spirit** » Thu May 13, 2004 8:30 pm

aha... now this info became very usefull to me

i got a 1.5 flywheel in stock ... never knew ya could swap em nor that it was 2kg lighter