D-Day is finally with us!
Moderators: daewoomofo, Moderators Group
D-Day is finally with us!
Hey Fellas!
The day we have all talked about and wondered who would get to it first, is here. Tomorrow (June 16th) I'm gonna go to the shop and start the process of installing the turbo. Wish me luck and stay tuned for pictures and a written report.
~Tango.
The day we have all talked about and wondered who would get to it first, is here. Tomorrow (June 16th) I'm gonna go to the shop and start the process of installing the turbo. Wish me luck and stay tuned for pictures and a written report.
~Tango.
Cogito ergo sum...
UPDATE:
The car is fully bolted up and ran fore the first time on Saturday night at around 7pm CST. We discovered a few problems with it, namely two fuel leaks. One was solved immediately (caused by a broken clamp) and the other (a broken fuel pump) is pending. So far that's the biggest problem I've had. Because yesterday was Sunday most places were closed so finding a new pump has to wait ill today. However the car did feel it's first taste of boost at around 10pm on Saturday, dumping the remnants of 5psi of boost to atmosphere under throttle lift-off Stay tuned. For the time being I have put the pictures I have so far, up on the board at :
Wonder Woo
The car is fully bolted up and ran fore the first time on Saturday night at around 7pm CST. We discovered a few problems with it, namely two fuel leaks. One was solved immediately (caused by a broken clamp) and the other (a broken fuel pump) is pending. So far that's the biggest problem I've had. Because yesterday was Sunday most places were closed so finding a new pump has to wait ill today. However the car did feel it's first taste of boost at around 10pm on Saturday, dumping the remnants of 5psi of boost to atmosphere under throttle lift-off Stay tuned. For the time being I have put the pictures I have so far, up on the board at :
Wonder Woo
Cogito ergo sum...
The car is now under boost. But not quite! The injectors I had (the Dodge Dakota 3.9 V6 ones) are still too small! I got my hands on a set of injectors from a Toyota Starlet GT Turbo. But the problem now is that the connectors are different from mone. I'm now gonna have to find a loom and cut the connectors off. The car is driving but we have disconnected the blow-off valve to allow the boost to blow to atmosphere temporarily until I get the fuelling right. Stay tuned. In the mean time if there' anythign anybodyw ants to know go ahead and ask. At the moment the only thing on my nerve is the rattling that the intercooler makes (seeing that it's not bolted down, but suspended on the pipes, and it does vibrate on the wheel-well...need to sort that out in a minute). I drove the car last night under wide-open throttle and actually observed 1psi of boost registered on the boost gauge. Felt quite interesting too. I'll keep you posted.
Cogito ergo sum...
Good luck man, put that Woo in shape and make it run like lightning.
Last edited by mocpac on Fri Jul 04, 2003 4:57 am, edited 1 time in total.
So whats the deal, any luck?tango wrote:Well...I finally got the connectors for the Starlet injectors. On my next day off (not sure exactly when that is yet) I'm gonna go back to Kingston and get things straightened out..wish me luck.
~Tango.
Take some pictures
When hitting it from behind, I prefer to tap it "Daewoo Style"
NICE! a turbo daewoo, i think i should turbo my sisters daewoo when i do a turbo swap, hehe t-25 powered AUTO lanos, mean, anyways what size is your turbo, looks like its a nice size, anywyas give me specs on the turbo, how much pounds boost u running, everything, k bye.
95 Eclipse GS-Turbo
mods: Greddy Type-S BOV, Greddy Intercooler Piping, Injen Intake, Act 2100 Clutch, Act Xact flywheel, Apexi N1 Downpipe and Catback Exhaust, MCB Set to 16 PSI, BuddyClub2 Bodykit (Not Installed) and Greddy FMIC(not installed)
mods: Greddy Type-S BOV, Greddy Intercooler Piping, Injen Intake, Act 2100 Clutch, Act Xact flywheel, Apexi N1 Downpipe and Catback Exhaust, MCB Set to 16 PSI, BuddyClub2 Bodykit (Not Installed) and Greddy FMIC(not installed)