N/A tech, Cold Air Intakes, Spark Plugs/wires, Cat backs, Exhaust...etc
Moderators: daewoomofo, Moderators Group
-
kroz123
- Expert
- Posts: 592
- Joined: Sun May 30, 2004 3:47 pm
- Location: Oranjestad, Aruba
-
Contact:
Post
by kroz123 »
hey guys what's up,
I installed my oil press sender and the gauge reads the press fine but my oil gauge is Bar not Psi,
So when the car is idling it reads 3.5 with A/C on with the A/C off it reads 1.5 and when reved it reads 4.5
it's my car oil pressure good?
thanx
T18SED Engine.

-
debo890
- Super
- Posts: 250
- Joined: Mon Apr 26, 2004 3:36 pm
- Location: rhode island
Post
by debo890 »
yes, your oil pressure is fine. 1 bar = 14.7psi
@ 1.5 bar = 22.05 psi
@ 3.5 bar = 51.5psi
@ 4.5 bar = 66 psi
your pressure should increase gradually as you raise the rpm.

got drift?
-
kroz123
- Expert
- Posts: 592
- Joined: Sun May 30, 2004 3:47 pm
- Location: Oranjestad, Aruba
-
Contact:
Post
by kroz123 »
hey thanx alott debo and yeah the press increases as I raise the rpm.
thanx again

T18SED Engine.
