Air Flow meter C20xe

superbooze · Post by **superbooze** » Tue Mar 28, 2006 11:56 am

Hi Guys , Im new to your forum... i have an Opel Kadett...

My air flow meter packed up, i just wanna know if the Daewoo AFm works on the c20xe motor...which model it is and the part number... I also that there is a hyundai AFM that works as well

ant info would be apreciated

thanks

superbooze · Post by **superbooze** » Tue Mar 28, 2006 12:31 pm

.....

Is there any other AFM that will fit on my c20 xe motor....

ive heard of a BMW box shape, and hyundai elantra...

please guys , this is urgent...

MMamdouh · Post by **MMamdouh** » Tue Mar 28, 2006 12:42 pm

does daewoos have air flow meter? this is the first time i hear about it... i don't think we have it man.

MMamdouh

Brian5475E · Post by **Brian5475E** » Tue Mar 28, 2006 9:37 pm

Nope. No AFM or MAF . MAP yes.

Post by **PrecisionBoost** » Thu Mar 30, 2006 1:20 am

We don't have the Bosch system over here on this side of the pond.... it's all AC Delco or Delphi and they are all MAP based.

From what I've seen there are no Daewoo products using the Bosch system like your Kadett

I also have a couple Kadett's (known as a Passport Optima) (89 & 90).... ones a 2.0L 8V (C20LZ) and the other is a 2.0L 8V Turbo (C20GET ) and both use the Delco/MAP setup.

I think the reason for the different management systems was due to difference between emission standards.

mister_g · Post by **mister_g** » Thu Mar 30, 2006 1:07 pm

I want to install MAP od c20xe. MAF is big, and clumsy. Is it possible to make level adapter for MAP to ECU see MAF on the other side, but it's MAP acctualy?

Does anyone have tehnical details for MAP and MAF. Voltage or Resistior levels, diagrams, etc? I am able to make such level converter, but I dont' know tehnical detials on MAF and MAP...

Post by **PrecisionBoost** » Fri Mar 31, 2006 12:12 am

MAF is a direct reading of airflow..... MAP systems use throttle position data, intake air temperature data and manifold air pressure data to calculate the estimated mass air flow.

So.... there is no real way to make a simple adapter.... calculating the MAF info from the three sensors is the main thing the ECU is doing all the time.