injectors...

DomWoo · Post by **DomWoo** » Tue Feb 28, 2006 2:08 am

my buddy offered me a set of 400cc injectors off his turbo talon and i was wondering if they will work with the 1.6 lanos.

for those who dont know i have a Greddy emanage already installed and will compensate for the size change

i just need to know if they are high or low ohm and if they will fit in the wholes

if you guys dont know i guess ill just go pick them up and see

Nubira2.2 · Post by **Nubira2.2** » Tue Feb 28, 2006 2:35 am

If they are cheap try them and give us some feedback

DomWoo · Post by **DomWoo** » Tue Feb 28, 2006 2:39 am

they are free

Audacity Racing · Post by **Audacity Racing** » Tue Feb 28, 2006 2:40 am

they should fit the holes on the fuel rail just fine. as for impedence... i have no idea, but i've asked at a forum with plenty of DSM guys so i should have an answer soon

Audacity Racing · Post by **Audacity Racing** » Tue Feb 28, 2006 3:13 am

they are low ohm

DomWoo · Post by **DomWoo** » Tue Feb 28, 2006 3:16 am

thanks man!!

JohnnyC · Post by **JohnnyC** » Tue Feb 28, 2006 4:04 am

I wish I knew what that means! hehe... What's a fuel rail... and what does these injectors being low ohm mean?

DomWoo · Post by **DomWoo** » Tue Feb 28, 2006 4:08 am

fuel rail is the tube that connects all the injectors before the regulator and low or high ohm is which they operate at.. most new cars use low owm

JohnnyC · Post by **JohnnyC** » Tue Feb 28, 2006 4:09 am

Thanks

GsiTurbo · Post by **GsiTurbo** » Tue Feb 28, 2006 4:46 am

Check Greddy manual to see if it supports low impedance. Most systems these days only run high imp. Also, stock Lanos injectors are high imp.

Tom

DomWoo · Post by **DomWoo** » Tue Feb 28, 2006 5:03 am

oops... i knew it was one or the other.. and the greddy has to have a resister inline with the injector.. to work it

thanks Tom..