Did some work on the car today....
Here is where I have removed the fenders, bumper, supports and passenger side inner fender well....... then I removed the entire front cross member by grinding welds and air chisling the joints.
While looking over the car I noticed that an entire section of the front inner fender had been replaced ( new piece lap welded over the old one )
Here is a picture from underneath.... where I have removed the undercoating is where the seam between panels were welded together.
Since I had a fair bit of deformation I figured that it might be wise to remove the front section at the joint between the new and old panels.
I have a donor Lemans in the back of my shop (technically I have two parts cars to pick from as of today.... the donor for this project will come from Tom's old chassis that we picked up out of storage today )
After all this hard work I decided that we needed to have a little fun so we took the car out to the front of my shop and made a quick video of a turbo GSi smoke show...
Unfortunatly the video is 6MB and it's fairly dark (since it's nearly 11pm and I have no headlights )
I will post it once I get a chance.... right now I'm at work so I don't have access to my FTP program. (yes... I know I'm a bastard.... at least I admit it)