Lanos 1.5 SOHC brakes upgrade project *HELP*

MMamdouh · Post by **MMamdouh** » Mon Jan 02, 2006 10:06 am

does the Lanos and Nubira share the same front rotors as far as size is concerned??

MMamdouh

tango · Post by **tango** » Mon Jan 02, 2006 9:37 pm

As far as I know the 1.6L Nubira and the Lanos share the same front rotors. Not sure about the 2.0L though.

MMamdouh · Post by **MMamdouh** » Mon Jan 02, 2006 10:00 pm

i think the 1.6 and the 2.0 Nubiras share the same suspension and brakes setup... right?

MMamdouh

Audacity Racing · Post by **Audacity Racing** » Fri Jan 06, 2006 4:07 pm

MMamdouh wrote:i think the 1.6 and the 2.0 Nubiras share the same suspension and brakes setup... right?

MMamdouh

the rotors may be smaller though

MMamdouh · Post by **MMamdouh** » Fri Jan 06, 2006 4:10 pm

well... we are getting a set of slotted and cross drilled rotors from ebay and they are for a 1.6 Lanos so if the 1.6 Nubira got the same rotors as a 1.6 Lanos then we are ok but if not then we are screwed

MMamdouh

karim · Post by **karim** » Fri Jan 06, 2006 10:33 pm

Cross drill and slott rotors will eat your brake pads, have used them before didn't like them. To have better braking is to have better pads higher boiling temp, try EBC they are great have tried them before.

MMamdouh wrote:well... we are getting a set of slotted and cross drilled rotors from ebay and they are for a 1.6 Lanos so if the 1.6 Nubira got the same rotors as a 1.6 Lanos then we are ok but if not then we are screwed

MMamdouh

MMamdouh · Post by **MMamdouh** » Fri Jan 06, 2006 11:45 pm

i warned the guys that are going to get them rotors about this and thay said it is worth it.

i can't get thease as i already abuse my pads... a set of them rotors will make me change pads every week, maybe if they were only cross drilled (non slotted) i would consider getting me a set.

MMamdouh

karim · Post by **karim** » Sat Jan 07, 2006 12:21 am

if the cross drill isn't made right it will crack by time.

MMamdouh wrote:i warned the guys that are going to get them rotors about this and thay said it is worth it.

i can't get thease as i already abuse my pads... a set of them rotors will make me change pads every week, maybe if they were only cross drilled (non slotted) i would consider getting me a set.

MMamdouh

MMamdouh · Post by **MMamdouh** » Sat Jan 07, 2006 11:38 am

indeed... but those are already bought and tested by Audacityracing... i say its a good feedback before spending our money.

if the company got cross drilled only then i might be intrested in a set... i already gave up the idea of cross drilling my old rotors in fear of cracking and all.

MMamdouh

mark13 · Post by **mark13** » Sun Jan 08, 2006 1:57 pm

Nubi 1.6 and 2.0 has the same front rotors
Lanos has different so MMamdouh don't do this...

MMamdouh · Post by **MMamdouh** » Sun Jan 08, 2006 2:25 pm

mark13 wrote:Nubi 1.6 and 2.0 has the same front rotors
Lanos has different so MMamdouh don't do this...

does that mean that the 1.6 Lanos got different rotors than the one on the 1.6 Nubira??

MMamdouh

mark13 · Post by **mark13** » Sun Jan 08, 2006 3:04 pm

yes they're diffrent... and if you're looking for slotted, cross drilled rotors for nubira it won't be easy... (no brembo max for example) only kvr performance afaik

Audacity Racing · Post by **Audacity Racing** » Sun Jan 08, 2006 3:49 pm

there are three companies in the united states that offer drilled/slotted rotors for all three models of old daewoo.

mmamdouh, perhaps you can use the rotors on your lanos next time you swap rotors.

if you want someone to act as an agent to get you some rotors, let me know and i'll see what i can do.

MMamdouh · Post by **MMamdouh** » Sun Jan 08, 2006 5:13 pm

OH SHIT

Zikas is going to get ballistic when he knows this, i told him that the rotors will fit... now they won't fit his car and i can't use them unless i upgrade the calipers as well

the guy thaty is getting them rotors is supposed to be back to Egypt on Thursday... no much time to act as the rotors are paid for and supposed to be delivred to him today.

i should learn to STFU till i am 100% sure of my clames... now i am very very sad

MMamdouh

MMamdouh · Post by **MMamdouh** » Sun Jan 08, 2006 5:20 pm

OK i am trying to reduce the amount of loss as possible:

why wouldn't the rotors fit? i know both cars have the ame bolt pattern 4x100 so that won't be a problem, what about the diameter? i know the 1.6 lanos got 356mm rotors so what abiut the nubira??

if the diameters are the same then i don't see why it shouldn't fit... can someone confirm??

MMamdouh

The original daewootech forum

Lanos 1.5 SOHC brakes upgrade project HELP

Lanos 1.5 SOHC brakes upgrade project HELP