F/S Lanos Sedan Custom Rear Deck
Moderators: daewoomofo, Moderators Group
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
F/S Lanos Sedan Custom Rear Deck
Well the rear deck is fiberglass. It uses the stock deck with some speaker trim rings. If you would want to paint it (I advise against this cuz the sun glare would be killer) it would need some sanding and final prep work. What I advise is to get it wrapped in some nice material and do the door materials to match. I had it all done in white vinyl... but the sun shrank it on me. haha That's what I get for buying cheap vinyl.
Here's how it looked with the white vinyl wrap:
I'm selling the speakers with it as it was made for this set. These things pound! I had people asking me if I put some 10s in the trunk. They can't believe me when I tell them that it's just from my components.
Here's the specs on the speakers:
Power Handling: 320 watts R.M.S.
6.5" Frequency Response: 30Hz-25Hz
20 oz. Strontium Magnet
4" Frequency Response: 45Hz-25kHz
18oz. Strontium Magnet
Carbon Honeycomb Cone
Butyl Rubber Surround
Chrome Plated Cast
Aluminium Basket
2 Layer High-temp ASV Voice Coil
25mm Silk Dome Tweeter
Surface or Flush Mount
Component Matched 12dB Per Octave Crossover Network
4 Ohm Impedence
Sensitivity: 91dB
Here's a pic of the speakers and x-overs:
The speakers still sell for USD $329.00 new but I can work out a good deal.
Make me an offer, any offer...
Here's how it looked with the white vinyl wrap:
I'm selling the speakers with it as it was made for this set. These things pound! I had people asking me if I put some 10s in the trunk. They can't believe me when I tell them that it's just from my components.
Here's the specs on the speakers:
Power Handling: 320 watts R.M.S.
6.5" Frequency Response: 30Hz-25Hz
20 oz. Strontium Magnet
4" Frequency Response: 45Hz-25kHz
18oz. Strontium Magnet
Carbon Honeycomb Cone
Butyl Rubber Surround
Chrome Plated Cast
Aluminium Basket
2 Layer High-temp ASV Voice Coil
25mm Silk Dome Tweeter
Surface or Flush Mount
Component Matched 12dB Per Octave Crossover Network
4 Ohm Impedence
Sensitivity: 91dB
Here's a pic of the speakers and x-overs:
The speakers still sell for USD $329.00 new but I can work out a good deal.
Make me an offer, any offer...
Last edited by daewooluvr on Mon May 08, 2006 2:11 pm, edited 1 time in total.
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
Ok, just let me know if something changes. I can't really go any lower due to all that is put into this.Audacityracing wrote:i am, but the price isn't in my window at the moment
I need to find some pics I have of the plexiglass crossover brackets. They looked pymp!
Found one (it's not great but it works)
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact: