WANTED: Daewoo Programmer
Moderators: daewoomofo, Moderators Group
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
WANTED: Daewoo Programmer
you can use that to reprogram the car for new keys as well as access maps and such... i've found it on a couple russian language sites, but don't knwo where to buy it
i want one
http://www.atg.com.ua/index.php?post=equipment
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
lets all pitch in and buy it together and just ship it to each other after we're done. i say by the time we get enough money together most of us will be really close to turboing. and after everyones done with it we'll have Tom hold on to it until one of us wants it again. i was about to also say if anyone new wanted it then we could charge him for it but not sure if that would go over all too well if its someone really new. crediabilty would be a must here.
its just a thought really.
nick
its just a thought really.
nick
save a tree, eat a beaver.
- BosnianLanos
- Expert
- Posts: 1661
- Joined: Thu May 27, 2004 10:31 pm
- Location: Clearwater, Florida
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
- PrecisionBoost
- Super Moderator
- Posts: 4437
- Joined: Thu Jun 19, 2003 5:59 am
- Location: Edmonton, Alberta, Canada
I will buy one sometime next year..... if someone hasn't allready.
My resources are "tapped" for the next 10 months..... I spent waaaaaaaaaay too much money on houses, renovations and other stuff this year.
I still have some money for car stuff.... but I will probably have to budget things and buy a few things at a time.
By this time next year I should have a pile of cash to put into Precision Boost Systems (my company) and since I'm going to be manufacturing stuff.... I'd be interested in getting something like this.
My resources are "tapped" for the next 10 months..... I spent waaaaaaaaaay too much money on houses, renovations and other stuff this year.
I still have some money for car stuff.... but I will probably have to budget things and buy a few things at a time.
By this time next year I should have a pile of cash to put into Precision Boost Systems (my company) and since I'm going to be manufacturing stuff.... I'd be interested in getting something like this.
2010 BMW 335D
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
-
- Expert
- Posts: 1011
- Joined: Sun Jun 05, 2005 10:04 am
- Location: AUSTRALIA
- Contact:
diagnostic cable
i bought this cable yesterday as i have a program installed to use it tell me what you think.
johnny
http://www.aldlcable.com/
johnny
http://www.aldlcable.com/
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
i hope you bought this instead of that cable http://www.obd2allinone.com/sc/toplevel.asp?cat=0
-
- Expert
- Posts: 1011
- Joined: Sun Jun 05, 2005 10:04 am
- Location: AUSTRALIA
- Contact:
cable
i did but im going to buy the scan tool also but i still need the cable to plug in my socket under the dash as i have the square type 12pin.
johnny
johnny
-
- Expert
- Posts: 1011
- Joined: Sun Jun 05, 2005 10:04 am
- Location: AUSTRALIA
- Contact:
diagnostic cable
so can i still use the cable from the dash socket to the computer.
johnny
johnny
- Brian5475E
- Expert
- Posts: 753
- Joined: Tue May 11, 2004 2:49 am
- Location: Cincinnati, Ohio USA
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
- Brian5475E
- Expert
- Posts: 753
- Joined: Tue May 11, 2004 2:49 am
- Location: Cincinnati, Ohio USA
- Contact:
sorry I meant this http://www.obd2allinone.com/sc/toplevel.asp?cat=0
Aveo that moves! Now I need those cams!