cold air intake

john_trickle · Post by **john_trickle** » Tue Dec 13, 2005 8:39 pm

hey guys can you tell me if this cai will fit the lanos it looks pretty close.
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 4595461574

Audacity Racing · Post by **Audacity Racing** » Tue Dec 13, 2005 9:55 pm

i think you'd be better off with this one...

http://cgi.ebay.com/ebaymotors/94-01-In ... enameZWD2V

they ship world-wide for a shipping fee of 18 US dollars...

if you used but it now you could walk away with that shipped to you for 45.06 Aussi dollars... half of what you're looking at there, and we know this one fits

daftmajin · Post by **daftmajin** » Wed Dec 14, 2005 12:39 am

this totally belongs in the Engine section. Good work new mods. lol.

AcingTeam · Post by **AcingTeam** » Wed Dec 14, 2005 3:03 am

john_trickle wrote:hey guys can you tell me if this cai will fit the lanos it looks pretty close.
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 4595461574

That's not a cai.

The one that Kenny posted is a CAI and will fit with some minor modifications.

john_trickle · Post by **john_trickle** » Thu Dec 15, 2005 10:56 pm

on the pic ive circled is that where the sensor goes or the breather hose and just to be sure this item on the pic wll fit my lanos.
johnny

Audacity Racing · Post by **Audacity Racing** » Thu Dec 15, 2005 11:00 pm

that's the breather tube connection.

you'll need to drill a hole for the sensor to fit

BosnianLanos · Post by **BosnianLanos** » Thu Dec 15, 2005 11:02 pm

Yeah, drilling the hole for the sensor is quite important. Last Saturday, I opted not to drill a hole for the sensor and just left it around in my engine bay. The performance was initially very weird, not the acceleration I'm used to. The car was getting very cold air but the ECU was reading hot engine bay air.

I drilled a hole and Bondoed around the sensor and everything is back to normal.

john_trickle · Post by **john_trickle** » Thu Dec 15, 2005 11:02 pm

ok so the part of the pipe goes to the throttle body and the second pipe joins with the blue silcone hose and goes down to the front guard.
johnny

john_trickle · Post by **john_trickle** » Thu Dec 15, 2005 11:03 pm

john_trickle wrote:ok so the part of the pipe goes to the throttle body and the second pipe joins with the blue silcone hose and goes down to the front guard.
johnny

also is it hard to drill the hole for the sensor do i need an adapter.

lanos2001 · Post by **lanos2001** » Thu Dec 15, 2005 11:04 pm

its not hard to dtill the hole but get the right size. putting in the actual sensor is a bitch though.

nick

Audacity Racing · Post by **Audacity Racing** » Thu Dec 15, 2005 11:05 pm

the pipe you see with the tube connection is the pipe from teh throttle body to the fender. you will need to get a rubber grommit or bondo the sensor in place. if you drill a hole and don't make it air-tight... you may get strange acceleration.

AcingTeam · Post by **AcingTeam** » Fri Dec 16, 2005 1:38 am

The second pipe (not the one with the breather hose connection) has to be cut in half... it's too long.

Look here:
http://www.daewootech.com/forum/viewtop ... 56&start=0

The original daewootech forum

cold air intake

cold air intake

Re: cold air intake

cai

cai

Re: cai