i just had to buy a new front end assembly...
Moderators: daewoomofo, Moderators Group
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
i just had to buy a new front end assembly...
soooo... i mentioned in the longest thread that i broke a wheel bolt off inside my hatch's hub while doing a brake replacement...
i took the car to a mechanic this morning (because i didn't have the bolt extractor and wasn't going to pay for one after i saw the cost plus the cost of a breaker bar). On ym way to the mechanic... i thought teh car felt as though it had a flat tire (only running with 3 lig bolts on the drivers front). my mechanic put it up, and we looked... and low and behold... the bolt had FRACTURED AGAIN!!!! so i had small pieces of a lug bolt floating around inside the hub... they caused a wee bit of damage...
i need a new:
hub
brake dust shield
rotor (was replacing anyway)
wheel bearing
grrr... it's gonna cost roughly 100 bucks to get it all plus 50 shipping to get it here monday[/i]
i took the car to a mechanic this morning (because i didn't have the bolt extractor and wasn't going to pay for one after i saw the cost plus the cost of a breaker bar). On ym way to the mechanic... i thought teh car felt as though it had a flat tire (only running with 3 lig bolts on the drivers front). my mechanic put it up, and we looked... and low and behold... the bolt had FRACTURED AGAIN!!!! so i had small pieces of a lug bolt floating around inside the hub... they caused a wee bit of damage...
i need a new:
hub
brake dust shield
rotor (was replacing anyway)
wheel bearing
grrr... it's gonna cost roughly 100 bucks to get it all plus 50 shipping to get it here monday[/i]
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
-
- Expert
- Posts: 492
- Joined: Mon Apr 19, 2004 8:40 am
- Location: Dallas County, TEXAS
- Contact:
That totally sucks. Well you can buy some chrome lugs from me if Aneab doesn't buy them first. Just if you needed them though.
99 A16DMS m/t Lanos 3dr
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
-
- Expert
- Posts: 492
- Joined: Mon Apr 19, 2004 8:40 am
- Location: Dallas County, TEXAS
- Contact:
Just need some stock ones? I can do that for sure.Audacityracing wrote:anyone got two stock lug bolts they can overnight me?
99 A16DMS m/t Lanos 3dr
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer