General, Humor, Post here everything that doesn't belong in any of the other forums.
Moderators: daewoomofo , Moderators Group
AcingTeam
Expert
Posts: 2700 Joined: Thu Jun 17, 2004 2:48 am
Location: New Milford, CT
Contact:
Post
by AcingTeam » Tue Dec 06, 2005 12:33 am
mmamdouh wrote: i bet that Leganza of yours got a sun roof... it is the only way that that guy could fit his head into the car.
MMamdouh
Unless he's a midget dickhead
daftmajin
Expert
Posts: 492 Joined: Mon Apr 19, 2004 8:40 am
Location: Dallas County, TEXAS
Contact:
Post
by daftmajin » Tue Dec 06, 2005 1:24 am
I LAUGHED ALMOST THE WHOLE WAY THROUGH READING THE LAST TWO PAGES! DAMN I WISH I WAS BAKED RIGHT NOW.
99 A16DMS m/t Lanos 3dr
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer
Audacity Racing
moron
Posts: 4493 Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Post
by Audacity Racing » Tue Dec 06, 2005 1:26 am
hey daftmajin... can you go get those otehr measurements real fast?
Audacity Racing
moron
Posts: 4493 Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Post
by Audacity Racing » Tue Dec 06, 2005 1:27 am
hey and get two more while you're at it please
fender width (from bumper to where the mud-flap would be)
and car width at the front of the fender (where you'd attach a lip on both sides)
daftmajin
Expert
Posts: 492 Joined: Mon Apr 19, 2004 8:40 am
Location: Dallas County, TEXAS
Contact:
Post
by daftmajin » Tue Dec 06, 2005 1:29 am
Audacityracing wrote:
fender width (from bumper to where the mud-flap would be)
Just to clarify. are you talking about something like this?
?
as for the other one... i Dont really under stand. can you show me an example? like I did.
Last edited by
daftmajin on Tue Dec 06, 2005 1:43 am, edited 1 time in total.
99 A16DMS m/t Lanos 3dr
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer
daftmajin
Expert
Posts: 492 Joined: Mon Apr 19, 2004 8:40 am
Location: Dallas County, TEXAS
Contact:
Post
by daftmajin » Tue Dec 06, 2005 1:44 am
daftmajin wrote: Audacityracing wrote:
fender width (from bumper to where the mud-flap would be)
Just to clarify. are you talking about something like this?
?
as for the other one... i Dont really understand. can you show me an example? like I did.
99 A16DMS m/t Lanos 3dr
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer
daftmajin
Expert
Posts: 492 Joined: Mon Apr 19, 2004 8:40 am
Location: Dallas County, TEXAS
Contact:
Post
by daftmajin » Tue Dec 06, 2005 2:02 am
OK. now i understand. So those two and then the other two you mentioned in the other thread. I'll take care of it.
1. distance from knuckle to control arm joint (knuckle being lowest most object on control arm... need to center of it)
2. ground clearance to control arm joint
3. fender width (from bumper to where the mud-flap would be)
4. car width at the front of the fender (where you'd attach a lip on both sides)
BTW. Glad to help. What are you doing with these measurements though?
99 A16DMS m/t Lanos 3dr
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer
Audacity Racing
moron
Posts: 4493 Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Post
by Audacity Racing » Tue Dec 06, 2005 2:10 am
making my final suspension design components...
i've had my a-arms done for a while.. but i never knew how much travel to apply plus steering radius. with these numbers i'll be able to figure it out
daftmajin
Expert
Posts: 492 Joined: Mon Apr 19, 2004 8:40 am
Location: Dallas County, TEXAS
Contact:
Post
by daftmajin » Tue Dec 06, 2005 4:24 am
Just got a strange phone call from a friend of mine. He wants me to take him, his friend, and his friend's mom to TENNESSEE... tonite.... like in a few hours! The only things that make me want to do it are getting paid and having the chance to stop by Kenny's!!!! My friend's are f'ing crazy!
99 A16DMS m/t Lanos 3dr
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer
CustomLanos
Expert
Posts: 579 Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:
Post
by CustomLanos » Tue Dec 06, 2005 4:26 am
your gunna get robbed
I wish my grass was emo....so it would cut itself
daftmajin
Expert
Posts: 492 Joined: Mon Apr 19, 2004 8:40 am
Location: Dallas County, TEXAS
Contact:
Post
by daftmajin » Tue Dec 06, 2005 4:27 am
CustomLanos wrote: your gunna get robbed
Maybe. He said the dude's mom is a druggie. LOL.
99 A16DMS m/t Lanos 3dr
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer
CustomLanos
Expert
Posts: 579 Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:
Post
by CustomLanos » Tue Dec 06, 2005 4:29 am
yea.... your fucked.
I wish my grass was emo....so it would cut itself
CustomLanos
Expert
Posts: 579 Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:
Post
by CustomLanos » Tue Dec 06, 2005 4:29 am
o yea, bring a knife.
I wish my grass was emo....so it would cut itself