Lanos flywheel dimensions needed

Post by **PrecisionBoost** » Sat Nov 19, 2005 2:18 am

Hey guys.... I'm at work fooling around with the instrument cluster from my Acura 3.5RL and Tom (who is working on short shifters down stairs) came up and asked me to start a post for him.

Tom needs the flywheel dimensions

1) Outside diameter (edge of gears )
2) Inner flat face diameter ( outside edge of area where the clutch rides)
3) Number of bolts
4) Number of gear teeth
5) Thickness of flywheel

He might have a line on 1.6L and 2.0L aftermarket flywheels

That would make me very happy.... and I'm sure there are a few of you that would be interested in a lightweight flywheel.

Brian5475E · Post by **Brian5475E** » Sat Nov 19, 2005 3:16 am

As long as it works for the Aveo then I'm happy

GsiTurbo · Post by **GsiTurbo** » Sat Nov 19, 2005 7:08 am

Brian5475E wrote:As long as it works for the Aveo then I'm happy

We dont know that, as we need dimensions / photo of that flywheel too

Tom

Post by **PrecisionBoost** » Tue Nov 22, 2005 5:07 pm

anyone??

MMamdouh · Post by **MMamdouh** » Tue Nov 22, 2005 6:07 pm

no idea whatsoever... sorry man

MMamdouh

debo890 · Post by **debo890** » Tue Nov 22, 2005 6:32 pm

is it for a lanos or nubi? i can send you my old nubi flywheel for the 2.0 as i am using the 8 bolt flat flywheel from an xe.

GsiTurbo · Post by **GsiTurbo** » Tue Nov 22, 2005 7:14 pm

Its for both. We do have stock Nubi flywheel - but thanks!!

And check your email

What it all comes down to, if no-one is willing to provide Lanos flywheel sizing, there will be no Lanos billet aluminum flywheel. Its that simple.

Tom

Audacity Racing · Post by **Audacity Racing** » Tue Nov 22, 2005 7:15 pm

someone go tear their car apart

GsiTurbo · Post by **GsiTurbo** » Tue Nov 22, 2005 7:20 pm

Audacityracing wrote: someone go tear their car apart

Or use car-parts.com, find a Lanos flywheel near their place and go for a ride with the measuring tape and digi camera

Brian5475E · Post by **Brian5475E** » Wed Nov 23, 2005 2:53 am

Sorry closest to me is 100 miles

mcewanslager2k2 · Post by **mcewanslager2k2** » Sun Dec 04, 2005 10:37 pm

hello
Ive got my old flywheel somewhere, i will try to hook it out in the next week, and post the details on for ya.

Andy

Audacity Racing · Post by **Audacity Racing** » Sun Dec 04, 2005 10:41 pm

mcewanslager2k2 wrote:hello
Ive got my old flywheel somewhere, i will try to hook it out in the next week, and post the details on for ya.

Andy

you sir, are a saint

mcewanslager2k2 · Post by **mcewanslager2k2** » Sun Dec 18, 2005 8:31 pm

Alrite guys,
Cant seem to find the flywheel at the moment but hold your breathe im sure its in me garage some where, or it might be at my nans house. As soon as i find it i will post the dimensions on here.

kinkyllama · Post by **kinkyllama** » Sun Dec 18, 2005 8:35 pm

Tom, when will you know about the 2.0 aftermarket flywheel? Im guessing its better than the flywheel i have, right? I was gonna get that stuff installed next week too

Audacity Racing · Post by **Audacity Racing** » Sun Dec 18, 2005 8:40 pm

i was under the impression that the 1.6 and the 2.0/2.2 all had the same flywheel (atleast that's what chris and i had been talking about)

according to gm-car-parts... that is NOT the case though, so i am confused

The original daewootech forum

Lanos flywheel dimensions needed

Lanos flywheel dimensions needed

Ive got my old flywheel sumwhere.....

Re: Ive got my old flywheel sumwhere.....