The longest Thread ever!!!

General, Humor, Post here everything that doesn't belong in any of the other forums.

Moderators: daewoomofo, Moderators Group

Locked
Audacity Racing
moron
Posts: 4493
Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:

Post by Audacity Racing »

i meant how much is it... not how is... haha, like, give me a distance :lol:
Audacity Racing
moron
Posts: 4493
Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:

Post by Audacity Racing »

anf mmamdouh... that was freakin expensive... you're right. :roll:
CustomLanos
Expert
Posts: 579
Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:

Post by CustomLanos »

lanos2001 wrote:how bad do they rub? i'm gonna be lowering mine but before i do i've been trying to figure out if i need to buy new rims or not. like right now mine rub but only if i'm going fast enough with a full tank and at least one other person in the car and thats when i hit a bump.


nick
They rub almost every time i hit a medium size bump, and with 3 other people in the car my rear tires rub when i reach the bottom of a slope and when ever i gun it.
I wish my grass was emo....so it would cut itself
Image
DArkstalker
Super
Posts: 246
Joined: Sun Jun 05, 2005 11:05 pm
Location: Odessa, Texas
Contact:

Post by DArkstalker »

what is the longest thread before this.
CustomLanos
Expert
Posts: 579
Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:

Post by CustomLanos »

its in the spanish forum, its like 29 or sumthin.
I wish my grass was emo....so it would cut itself
Image
User avatar
lanos2001
Expert
Posts: 4245
Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma

Post by lanos2001 »

okay then i should expect about the same then. how much did you lower the car itself? mine will only be 1.3" drop all the way around and i'll be having the KYB-GR2 shocks.

nic
Image

save a tree, eat a beaver.
DArkstalker
Super
Posts: 246
Joined: Sun Jun 05, 2005 11:05 pm
Location: Odessa, Texas
Contact:

Post by DArkstalker »

Audacity Racing
moron
Posts: 4493
Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:

Post by Audacity Racing »

i'm still not getting my answer about ground clearance... how much is the distance from the ground to the edge of the bodywork under the door?
User avatar
lanos2001
Expert
Posts: 4245
Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma

Post by lanos2001 »

well if you have like a 1.3 inch drop then measure your woo and minus that. :D i would've told you but mine aren't installed yet.

nick
Image

save a tree, eat a beaver.
Audacity Racing
moron
Posts: 4493
Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:

Post by Audacity Racing »

i don't have a standard woo on the ground to measure though
Audacity Racing
moron
Posts: 4493
Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:

Post by Audacity Racing »

i just made a shocking realization...


there are TONS of parts for the woo that we haven't even seen because they are hidden away at evofusion...


go to www.evofusiondesign.com and look at the web catalog... then look at the "all korean models" section. there are some NICE dress up pieces (chrome goodies!)
daftmajin
Expert
Posts: 492
Joined: Mon Apr 19, 2004 8:40 am
Location: Dallas County, TEXAS
Contact:

Post by daftmajin »

Hey kenny, have you thought about doing carbon fiber fenders? It would look hot and drop some weight? BTW my car has 1.5 inch drop intrax but my wheel/tires make it about 1.4 inch drop. I will try to measure my clearance for you soon. Pretty cold outside. You want clearance from the jack spot or where the body ends under the door?
99 A16DMS m/t Lanos 3dr
Eng:APC/DaewooTech.Net/Magnecor/NGK/Optima/Ractive/Unique Motorsports/powdercoated valve cover/removed intake resonator
Susp:Intrax/KYB
Rollers:Falken/Rage
Ext:Dan's Decals/mesh grille/OEM wing&foglights
ICE:Audiobahn/Pioneer
Audacity Racing
moron
Posts: 4493
Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:

Post by Audacity Racing »

um... to the bottom of the jack point line (not the cut out, but that stipe of sheet metal that runs the length of the car)



as for cf fenders... i'm thought about it... but that's a WHOLE lot of cf :shock: i can justify a lot, but that's a little too much i think. I would love to do it though. That green kevlar/black carbon fabric is going to look BEAUTIUFL on my green woo... no doubt about it!


Image

the cf/kevlar hybird i'm going to use :D 8)
Last edited by Audacity Racing on Wed Nov 30, 2005 12:17 am, edited 1 time in total.
Audacity Racing
moron
Posts: 4493
Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:

Post by Audacity Racing »

there at evofusion... they have chrome mirror trim rings, speedo rings, chrome door handle kits, gas doors, etc... PIMP!
CustomLanos
Expert
Posts: 579
Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:

Post by CustomLanos »

On the topic of ground clearence......i lowered my car 1.6 inches but i dont nkow what the glearence is from the ground. All i know is that i have never bottomed out in my car, and i still havent bottomed out now that i have 14" steelies on my car.
I wish my grass was emo....so it would cut itself
Image
Locked