General, Humor, Post here everything that doesn't belong in any of the other forums.
Moderators: daewoomofo , Moderators Group
Efratech
Admin
Posts: 2280 Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:
Post
by Efratech » Wed Nov 16, 2005 4:14 pm
you did mine? when?
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
CustomLanos
Expert
Posts: 579 Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:
Post
by CustomLanos » Wed Nov 16, 2005 4:19 pm
i think i did it a while ago, but i posted it and you never responded so i deleted it from my computer.
I wish my grass was emo....so it would cut itself
CustomLanos
Expert
Posts: 579 Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:
Post
by CustomLanos » Wed Nov 16, 2005 4:20 pm
lanos2001 wrote: can you do me a favor and lower a pic of my car but just lowered a bit. i have intrax lowering springs (1.3inch drop) from daftmajin but i'm waiting on getting some shocks too. thanks
nick
post a pic....
I wish my grass was emo....so it would cut itself
lanos2001
Expert
Posts: 4245 Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma
Post
by lanos2001 » Wed Nov 16, 2005 4:26 pm
its an old pic and not the best but hoepfully you can do something with it. thanks again
nick
save a tree, eat a beaver.
CustomLanos
Expert
Posts: 579 Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:
Post
by CustomLanos » Wed Nov 16, 2005 4:34 pm
no sweat...
I wish my grass was emo....so it would cut itself
CustomLanos
Expert
Posts: 579 Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:
Post
by CustomLanos » Wed Nov 16, 2005 4:41 pm
with those springs it might looks like this...
I wish my grass was emo....so it would cut itself
Efratech
Admin
Posts: 2280 Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:
Post
by Efratech » Wed Nov 16, 2005 5:11 pm
CustomLanos wrote: i think i did it a while ago, but i posted it and you never responded so i deleted it from my computer.
Well, sorry, i dont remember seen it, i usually dont have time to look at all post
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
lanos2001
Expert
Posts: 4245 Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma
Post
by lanos2001 » Wed Nov 16, 2005 5:56 pm
sweet thanks. now you've motivated me to buy them earlier and put myself further in debt. thanks
nick
save a tree, eat a beaver.
lanos2001
Expert
Posts: 4245 Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma
Post
by lanos2001 » Wed Nov 16, 2005 10:44 pm
so...... can't wait to see what the next person writes.
nick
save a tree, eat a beaver.
Audacity Racing
moron
Posts: 4493 Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Post
by Audacity Racing » Wed Nov 16, 2005 11:09 pm
oooo oooo! me! me! i get in next!
hahaha... i'm lame and i know it
Audacity Racing
moron
Posts: 4493 Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Post
by Audacity Racing » Wed Nov 16, 2005 11:10 pm
i've browsed the new posts and now i'm off to play some battlefield two... lates
lanos2001
Expert
Posts: 4245 Joined: Thu Sep 30, 2004 9:35 pm
Location: lawton oklahoma
Post
by lanos2001 » Wed Nov 16, 2005 11:12 pm
i was gonna wait to get the xbo360 but i played it at walmart the other night and played call of duty 2 and it was freaking sweet. so now i'm gonna spend like $500 to get both. never played battlefield. i've played battleship.
nick
save a tree, eat a beaver.
Audacity Racing
moron
Posts: 4493 Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Post
by Audacity Racing » Thu Nov 17, 2005 12:26 am
hey erfinder....
do you have any experience with carbon fiber? i have a lot, but not with asthetic fiber, only structural....
does anyone have any knowledge on asthetic cf?
CustomLanos
Expert
Posts: 579 Joined: Thu Sep 30, 2004 1:27 pm
Location: Swansea,Ma
Contact:
Post
by CustomLanos » Thu Nov 17, 2005 3:51 am
i wish i did.
I wish my grass was emo....so it would cut itself
Audacity Racing
moron
Posts: 4493 Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Post
by Audacity Racing » Thu Nov 17, 2005 4:00 am
my hood skeleton is laid out, and my first two layers are done... but the top layer is next and i'm not very confident in my abilities with it